30282
102
Zoom out
Zoom in
Previous page
1/110
Next page
Manual
101
V-TAIL+
*
Elevator
trv' = Control surface deflection
for down-elevator
trv# = Control surface deflection
for up-elevator
Rudder
trv' = Control surface deflection
for rudder in one direction
(e.g. up)
trv# = Control surface deflection
for rudder in the other di-
rection (e.g. down)
Spoiler
Elevator trim correction for Spoiler
(airbrakes):
pt1 = Elevator compensation for
half-deployed spoilers
pt2 = Elevator compensation for
fully deployed spoilers
Flap
Elevator trim correction for Flap:
trv' = Elevator compensation for
(e.g.) Thermal setting
trv# = Elevator compensation for
(e.g.) Speed setting
Thr -Tr
Elevator trim correction for throttle
(motor):
dead = Dead-zone / from which
point does elevator cor-
rection take effect?
trv = Elevator compensation for
full-throttle
* only appears if V-TAIL+ is active
21.1.6. 4 FLAPS model template
Suitable for:
F3B, F3J,
Gliders with four wing flaps, with electric power
system, also with V-tail.
Typical models:
DG 600, ASW 27, Milan, E
URO /ELEKTRO-MASTER,
Alpina, ASH 26.
Assigned transmitter controls and switches:
Assignment used:
GLIDER
You will find an overview of the global assignment of
transmitter controls and switches in Chapter (Î 22.1.).
Assigned servos / receiver outputs:
1
2
4
5
6
3
7
8
9
Spoiler
Spoiler
AILERON+
Throttle
AILERON+
ELEVATR+
Rudder
FLAP+
FLAP+
Servo configuration MPX-UNI
Timer setting: Motor run time
Sum timer ´ controlled by Throttle (E).
Tow release instead of Throttle: (Î 21.1.5.)
GLIDER.
Fine-tuning:
!
Steps a. and b. (Î 21.1.),
Check functions.
c. Activate throttle to elevator mixer
G, select
ELEVATR+, select Thr -Tr input,
set
10% down-elevator.
If you wish to adjust the value in flight, allocate it to
one of the 3-D digi-adjusters (Î 20.1.).
d. Special features when calibrating the servos
FLAP+ and AILERON+
(input:
Spoiler, Parameter: offs = OFFSET)
Models with a four-flap wing generally employ what
is known as the Butterfly or Crow system as a land-
ing aid: ailerons max. up, camber-changing flaps
max. down. For this function the flap servos, in par-
ticular, have a highly asymmetrical working range:
The maximum control surface travel in the up-
direction (approx. 20°) is required for aileron con-
trol. For landing the flaps are required to deflect
down as far as possible in order to achieve maxi-
mum braking effect (if possible > 60°).
This means that the servo travel must be greatly
reduced in the up-direction, unless the servo output
lever is not already installed “offset” (mechanical
differential). As a result valuable servo travel is for-
feited, available servo power is wasted, and you
have to accept unnecessarily high gearbox play,
reduced servo resolution and increased shock
loads on servo gears in hard landings.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo9 in the language / languages: Dutch as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo9

Multiplex ROYALevo9 User Manual - English - 58 pages

Multiplex ROYALevo9 User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info