30266

Multiplex ROYALevo12 Manual

52
Zoom out
Zoom in
Previous page
1/57
Next page
Instructions
Page 107
17. Main menu „Timer“ AA
The ROYALevo has 5 timers. Four of them you will find in
the Timer menu A. The fifth timer records the operating
time of the transmitter, and is only shown in status dis-
play 4.
Oper.time 5.25h
After 1000 hours the timer stops.
17.1. Sub-menu „Model“
I affects active model only
Range = 1000 h (stops at the end)
Press the REV/CLR button to erase
This timer is present once in each model memory, and it
runs constantly when the transmitter is switched on.
The wide range enables you to record the operating
time of any model over an entire season.
17.2. Sub-menu „Slot“
I affects active model only
Alarm range = 3:30:00 (3 ½ hours)
Time range = 4:30:00 (4 ½ hours)
Erase: in menu only
The special feature of this timer is that it is started with
the assigned switch, but cannot be stopped again using
the same switch until the slot time has concluded.
Applications:
• Measuring the total time of a flight
• Slot time in competitions
When you open the sub-menu, you will see the follow-
ing items below the timer name (Slot, Sum or Interval)
and Exit:
Line 1: Time
This is the time which has elapsed since the timer star-
ted. If you select this field, you can erase the time with
the REV/CLR button.
Line 2: Alarm = Slot time
This is where you set and display the slot time.
Line 3: Difference
(display only)
This line shows the time which also appears in status
display 3. It is calculated as the difference between Time
and Alarm. The arrow before the difference indicates
the direction in which the indicated time is running:
' counting up
# counting down
Line 4: Switch
(display only)
This line shows the switch you are using to control the
timer (<N), and the location of the ON state (' = for-
ward). When the switch is at the selected ON position,
an asterisk '* appears after the arrow.
Alarm sequence:
• 10 seconds before the set alarm time: short beep
every second (æ)
• When the alarm time is reached: long beep (æ --- )
17.3. Timer „´´ Sum“
I affects active model only
Range = 3 h 30 min
Press REV/CLR button in status display 3
(or in menu) to erase
This timer acts cumulatively, i.e. it sums the times. Once
started, it can be stopped again using the same switch,
then re-started by operating the switch once more.
Application:
Timing motor runs using throttle control as switch
You can set up the “Sum” timer to work in two different
modes:
1. Set alarm to 0:00:00
The timer begins at zero, runs forward (count-up),
adds the time and is stopped and re-started using
the assigned switch. You can reset it to zero in sta-
tus display 3 using the REV/CLR button, or in this
menu. In this case there is no alarm.
2. Alarm not set to 0:00:00
The timer begins at the alarm time you set, runs
backward (count-down) and sounds the alarm
when the selected time has elapsed.
Alarm sequence:
• starting 5 min before the set alarm is reached:
short double beep every minute (ææ)
• 5 seconds before the set alarm time:
short double beep every second (ææ)
• When the alarm time is reached:
long double beep (æ --- æ ---)
17.4. Sub-menu „¶¶¶¶ Interval“
I affects active model only
Range = 3 h 30 min
Automatic erase at every re-start
With this timer you can call up the set interval as often
as you like.
The timer starts running at the set alarm time, runs
backward (count-down) and sounds the alarm when the
selected time has elapsed.
If the switch is at the ON position at the end of the alarm
time, the interval re-starts.
If the switch is at the OFF position at the end of the
alarm time, the timer continues to count up until the
maximum value is reached (4 h 30 min).
Alarm sequence:
• 1 second before the set alarm time:
short triple beep (ææ æ)
• When the alarm time is reached:
long triple beep (æ --- æ --- æ)
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo12 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo12

Multiplex ROYALevo12 User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info