30266
41
Zoom out
Zoom in
Previous page
1/57
Next page
ROYAL evo
Page 96
Example 2: Coll. pitch curve phase Cruise
(linear, symmetrical coll. pitch curve for identical reac-
tions during climb and descend)
The ROYALevo offers a 6-point coll. pitch curve. The
advantage of such a curve is: Not too many points to
adjust. “Flat“ curve for hovering in normal and reversed
flight possible.
14.2.11. Parameter "Throttle" (Throttle curve)
I affects the active model only
Range 0 - 100%
4 one throttle curve for each flight phase
F each curve point can be assigned to a 3-D digi-
adjustor (è 10.2.2)
Adjustment of the throttle curve is done in the menu H
Control/Throttle. Each flight phase can have a
separate curve with 5 points to adopt the curve to each
individual phase. The goal is to stabilize the RPM count
for the system in all situations.
Example 1: Throttle curve phase Hover
Example 2: Throttle curve, phase Acro
(symmetrical, V-shaped throttle curve to increase throt-
tle in normal and reversed flight)
Throttle curve for Autorot(ation)Autorot(ation)
The flight phase named Autorot (phase 4 as standard,
highest priority) has a fixed throttle position (“safe” idle
with open clutch or motor OFF) for the training of auto-
rotation landings.
The points P1 ... P5 can’t be adjusted separately. Chang-
ing one of the points will affect all the others too.
Parameter Min.Min. (Idle)
Throttle limiter
The parameter Min. determines the RPM count, if the
throttle limiter is set to min. or idle (to start the motor).
The parameter is independent of the flight phase.
The horizontal dotted line in the diagram shows for all
phases the position of the throttle limiter. The throttle
value is limited and no higher throttle can be achieved,
independently of the flight phases:
' TIP:
To adjust the carburettor (parameter Min.) move the
throttle limiter to idle. Changing the Min. value moves
the dotted line and makes the value visible in the dia-
gram.
14.2.12. Parameter „RPM“ speed regulators
Control signal for speed regulators
I affects the active model only
Run time 0,0 to 4,0 sec
4 a fixed value for each flight phase
F Fixed value and run time can be assigned to a 3-D
digi-adjustor for modifications during the flight
(è 10.2.2)
With RPM a predefined number of rotations per minute
(RPM) can be set. This works also if no control is as-
signed to FLAP/RPM.
If you assign a control to this function the regulator can
be switched off if you move the control to idle.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo12 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo12

Multiplex ROYALevo12 User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info