Manual Multiplex PROFIcar4000 (page 10 of 16) (English)

30242

Zoom out

Zoom in

1/16

PROFI mc 4000PROFI mc 4000

Version 2.0

The V-characteristic is indicated by the letter V

instead of A. The second line on the screen then

looks like this:

ANALOGUE SW.: V1 Ä

The parameters „Effect“ and „Window“ for the

analogue switches are adjusted in the usual way,

but the maximum now applies to both end-

points of the transmitter control.

2. Using analogue switches

Let us assume that you have „created“ a mixer

using SERVOMIX which has ELEVATOR as in-

put 1 and FIXED VALUE as input 2.

In the „SERVO adjustment/TRAVEL/CURVE“

menu you can now define the analogue switch as

the FIXED VALUE input.

;SERVO 1:SERVOMIX

,2:FIXED VAL. V1-A Ä

"— — —" 20%

" "P: 3•

V1-A means that analogue switch 1 has the V-

characteristic and is operated by transmitter con-

trol A.

If you set up this example in your PROFI mc 4000

to try it out, you can check its effect very simply by

running the servo monitor in Menu 5.

6.6 Running time for the current lap

displayed on the screen

This is how it used to work:

The time for the current lap was nowhere to be seen.

You had to wait until the next lap started before you

could see the time for the lap which had just finished.

This is how it works now:

The time for the current lap is displayed in the

„Counter“ menu.

;COUNTER : S06'*Ä

LAP : 12

,START: 0

LAP13: 00:01:12.25_

Key to this display:

LAP : 12 12 laps have been completed

START: 0 Lap counter begins at 0

LAP13: 1 minute 12.25 seconds have

already elapsed in the 13

lap

When the 13

lap is finished, LAP jumps to 13, and

the current time for lap 14 is shown in the bottom line.

6.7 Battery operating time moved to

Power-on menu 2

This is how it used to work:

The operating period for the transmitter and the alarm

threshold for the battery monitor were part of Menu 4.

This is how it works now:

We have moved the operating time and the alarm

threshold for the transmitter battery into the second

Power-on menu. These seldom needed functions are

out of harm’s way there.

Just to remind you: you reach the second Power-on

menu by pressing the q button after switching on the

transmitter with the k button held pressed in.

We have also moved the menu point DISCHARGE to

the same location so that all the items to do with the

transmitter battery are kept together.

Power-ON menu 2

--------------------

;ALARM THRESHOLD

,DISCHARGE OP.TIME_

6.8 Changing base type

discontinued

This is how it used to work:

You could check the base type of a model and

change it at any time. However, changing the base

type loses all the settings you have already made,

and as this is not helpful we have now made it impos-

sible.

This is how it works now:

The Base Type menu point has disappeared. If you

want to see the base type which applies to your

model, you can do this in the MEMORY/NAME menu

(Typ: ...).

Change model name

--------------------

Typ:Glider butterfl

ŒCondor l.blue •

You will now find new symbols in the form of double

arrows „Œ •„ in all menus in which it is possible to en-

ter and change names. If space permits, the double

arrows are set to left and right of the editable charac-

ters (see above: „Changing model name“), otherwise

only to the right of them (flight mode names and free

mixer names).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar4000 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex PROFIcar4000 Manual

Product: