30242

Multiplex PROFIcar4000 Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
PROFI mc 4000PROFI mc 4000
Version 2.0
7
value is +30% (with the exception of collective pitch
trim for helicopters).
'' TIP:
If you reverse a transmitter control, you must also
reverse the direction of the trim. Open the trim travel
adjust field and reverse the direction of effect by
pressing the y button. You will see that the prefix
symbol for trim travel changes.
„-10%“ means that the trim has been reversed.
5. Second independent
memory block (optional)
This is how it used to work:
The PROFI mc 4000’s model memory could store
data for 25 to 100 models depending on their com-
plexity. Many users exhausted even this capacity and
were obliged to store settings for rarely used models
on their PC. This is a good idea in any case, as it al-
lows the experimentally minded modeller to fall back
on the „last properly working version“ of a particular
model when a new variant turns out to be a bad
choice.
This is how it works now:
If you have this option installed in your transmitter,
two independent model memory blocks of equal size
are available to you. Memory capacity now rises to
50 to 200 models.
This is how it’s done:
You select which of the two memory ranges you wish
to use in Power-on menu 3.
Assuming that the memory expansion module has
been installed in your transmitter, this is the proce-
dure:
• Switch the transmitter on with
the k button pressed in
• Press the q button twice
This menu should now appear:
Power-ON menu 3
--------------------
;TEXT=Aa BEEP=OFFÄ
MODUL=2_
If the bottom line does not appear on your screen,
then the second memory module is not present.
• Open the select field with the w button.
• Select the module you wish to use with the q/n
buttons or the Digi-adjustor.
• Press k, k to return to the operating screen. The
selected module is now active.
'' TIP:
Don’t be alarmed if your transmitter now switches it-
self off briefly. Switching to the other memory module
initiates a complete „re-boot“ (re-start). This includes
saving the data, so you will also see the message
„Saving data!“ on the screen.
Interrogating the active memory module:
If you want to know which module is currently active
in your transmitter, simply move to the Memory
menu. From the operating screen you reach this with
w w. The top line of the screen displays the number
of the currently active memory module.
Memory 1 88% free
--------------------
;NAME COPYÄ
,TRIMCHECK CHANGE_
6.1 SLOW for mixer inputs
(formerly SOFT-SW)
This is how it used to work:
Mixer inputs could be switched „gradually“, but the de-
lay time was only effective during the switching proc-
ess itself. If you only switched on the input in question
once, then the set delay had no effect, i.e. the trans-
mitter control signal was passed to the servo without
any delay.
This is how it works now:
This facility has been expanded into a genuine
SERVO SLOW function. The actual switching process
still works „SLOWly“, but the function’s response to
commands from the associated transmitter control is
also affected, and works at the SLOW rate which you
have set.
In the new software the SLOW time you have set al-
ways applies, i.e. the response to the transmitter con-
trol is delayed when switching on, switching off and
when the transmitter control is operated. It is in fact a
proper SERVO-SLOW function. The set delay time
therefore only affects the selected mixer input on the
selected servo.
This new method of operation clearly required a new
designation, and that is why we have changed the
menu point’s label from Soft-SW to SLOW.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex PROFIcar4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar4000 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info