30232
15
Zoom out
Zoom in
Previous page
1/23
Next page
32
The next step is to define the basic settings for full throttle (LL), idle () and for the
lock point (ŒŒ). These settings ensure that servo 2 (throttle/brake servo) is set up
correctly to suit your model.
A press until
SS--TRAVTRAV
appears
S-TRAV
2: •- 3
%
A
Select the desired
point with the trigger,
then set using the
digi-adjustor
ŒŒ Lock point 0 110 %
Idle +/- 50 %
LL Full throttle 0 110 %
7.3. Idle trim
The idle trim can be used to compensate for changes in the
running characteristics of any car with an internal-combustion
motor, e.g. changes due to fluctuations in motor temperature.
Idle trim allows you to adjust the idle by 28% in either
direction. Each increment offsets the idle point by at least 1%
(fine) and at most 4% (coarse). You can select the size of the
trim increment in the “TRIM” menu point of the T“ (è6.4,
page10). The default setting is MEDIUM (2%).
A vertical bar on the screen shows the current trim setting. In
the example on the right the idle has been offset in the
direction of “reduced throttle” by about half the full trim
range.
7.4. Trimming the brake lock point
The lock point of the brake tends to vary in the course of a
race, so we have provided a trim rocker which can be used to
compensate for these variations. The rocker affects the lock
point of the THROTTLE/BRAKE servo (servo 2).
The brake trim allows you to adjust the lock point by 28% in
either direction. Each increment offsets the idle by at least 1%
(fine) and at most 4% (coarse). You can select the size of the
trim increment in the “TRIM” menu point of the T“ menu
(è 6.4, page 10). The default setting is MEDIUM (2%).
A vertical bar on the screen shows the current trim setting. In
the example on the right the lock point of the throttle/brake
servo has been offset in the direction of “greater brake effect”
by slightly less than half the full trim range.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex PROFIcar301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar301 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex PROFIcar301

Multiplex PROFIcar301 User Manual - German - 23 pages

Multiplex PROFIcar301 User Manual - French - 23 pages

Multiplex PROFIcar301 User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info