561578
75
Zoom out
Zoom in
Previous page
1/84
Next page
Operating Instructions
Page 73
ENGLIS
H
Example: offset four-point swashplate
1
2
4
3
90° arrangement: Rotated
through 45°
You can set the COCKPIT SX to the arrangement shown
on the right if you are using swashplate type 4 and set
V-DREH to 45.
17. The free mixers MIX 1, 2 and 3
The COCKPIT SX features three free mixers. The mixers
are of equal value, and are set up and adjusted in the
same manner. All three mixers can also be used simul-
taneously.
In the EASY model type only MIX 1 is available. In the
model types GLIDER, ACRO and HELI you can work
with all three mixers if you wish.
How do the free mixers work?
A free mixer allows you to mix the control signal of one
transmitter control (source) into the control signal for a
servo (destination). The two control signals are simply
summed (added together). A switch can also be as-
signed to the mixer, so that the mixer input can be
switched on or off.
Two steps are required to prepare a free mixer:
a. Defining the mixer (17.1.)
Define the destination and the switch
b. Setting the mixer effect (Î 17.2)
Define the magnitude of the mixer input
17.1. Defining / adjusting the free mixers
Menu: (MIXER) MIXDEF
The MIXDEF menu is used to define the source, desti-
nation and switch for the free mixers.
Moving to the MIXDEF menu:
4 to MENU, r (SETUP appears),
3 to MIXER, r (TH >S4 appears),
3 to MIX1
r (MIXDEF appears)
If the MIXDEF menu does not appear, the mixer is
already defined, and can now be adjusted (Î 17.1.).
Press the 3-D digi-adjustor again briefly to open the
menu for defining the mixer.
Source Switch Target
In the right-hand picture AILERON is selected as the
source. The destination is servo 5. The mixer input is
switched on when switch 1 (CS/A-ROT) is in the for-
ward position.
a. Select the source
Move the stick / slider briefly
(Quick-Select)
The trims are not taken into account
b. Select the destination
Servo 1 to 7; use the 3-D digi-adjustor
c. Select the switch
Move the desired switch (Quick-Select);
The code number (1 to 4) appears
Move the switch to the
“mixer input active” position; the
hyphen indicates the selected setting
Code
No.
Switch name Function
1
CS
A-ROT
Combi-Switch
Auto-rotation
2
D-R Dual Rate
3
SNAP
DTC
Snap Flap
Direct Throttle
4
PH
AUX 2
Flight phases
Aux. channel AUX2
You can change the source, destination and switch in
any way, as long as you remain in this menu.
Once you have selected the source, destination and
switch, press the 3-D digi-adjustor r briefly to return to
the MIXDEF menu.
Note: removing the switch
If you have assigned a switch when defining the mixer,
the switch can be changed, but not removed.
If you wish the mixer to work constantly, you must not
assign a switch to it. The only means of removing the
switch is to erase the definition (Î 11.4.), and then re-
define the mixer without a switch.
17.2. Adjusting the mixer effect
If you wish to continue, and adjust the effect of the
mixer, turn the 3-D digi-adjustor one click to the left 4;
the menu shown below then appears.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex COCKPIT SX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex COCKPIT SX in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex COCKPIT SX

Multiplex COCKPIT SX User Manual - German - 83 pages

Multiplex COCKPIT SX User Manual - Dutch - 17 pages

Multiplex COCKPIT SX User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info