561578
74
Zoom out
Zoom in
Previous page
1/84
Next page
COCKPIT SX
Page 72
A-ROT
switch
PH
switch
Display
1
123
2
123
OFF
forward
3
123
The code number of
the active phase is
displayed con-
stantly; the other
two flash.
ON
back
auto-
rotation
any
123
All three code num-
bers flash.
Table 2: Flight phase indication in the menus
16.10.4. Copying flight phases
Menu: (
PHASES) COPY
The destination for the copy is selected in the menu.
The source is always the current flight phase, which
you have selected using the A-ROT and PH switches.
Moving to the Menu:
4 to MENU, r (SETUP appears),
r (MODEL appears), r (MODE appears),
3 to PHASES, r (current value appears),
3 to COPY, r
The number 0 flashes in the bottom line. Select phase
1 to 4 as destination using the 3-D digi-adjustor.
Check once more that you have selected the correct
source using the PH and A-ROT switches (Î table 1 in
section 16.10.3.).
A further brief press r on the 3-D digi-adjustor triggers
the copy process, and the flashing ceases.
Note: interrupting without making a copy
If you leave 0 as the destination, no copy will be made.
16.10.5. Setting the transition speed for switching
flight phases
Menu: (
PHASES) SPEED
The SPEED parameter can be adjusted to determine
the speed of transition from one flight phase to another.
Four settings are possible:
SPEED
Transition
0
immediate
1
fast approx. 1 sec
2
moderate approx. 2 sec
3
slow approx. 3 sec
Exception: Auto-rotation
If you switch to auto-rotation from flight phase 1, 2 or 3
the transition is always immediate, regardless of the
transition SPEED you have set.
Moving to the SPEED menu:
4 to MENU, r (SETUP appears),
r (MODEL appears), r (MODE appears),
3 to PHASEN, r,
3 to SPEED, r
The current setting flashes. Select the desired value
using the 3-D digi-adjustor (see table above).
A brief press r on the 3-D digi-adjustor concludes the
process. The value is stored.
16.11. Virtual swashplate rotation
Menu: (MIXER ROTOR) V-ROT
Virtual swashplate rotation electronically “rotates” the
swashplate. The purpose of this function is to prevent
the helicopter veering to one side when you apply a
PITCH-AXIS command.
Moving to the V-ROT menu:
4 to MENU, r (SETUP appears),
3 to MIXER, r (TAIL appears),
3 to ROTOR, r (V-ROT appears), r
The current value flashes in the bottom line. Use the 3-
D digi-adjustor to set a value within the range -100° to
100° (the “°” character is not displayed).
Negative values rotate the swashplate anti-clockwise,
positive values rotate it clockwise.
A brief press r on the 3-D digi-adjustor concludes the
process. The flashing ceases, and the value is stored.
V-ROT for other tasks
Even if the swashplate linkage is not in accordance
with the requirements stated in section 16.3.4., you can
still make adjustments using V-ROT.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex COCKPIT SX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex COCKPIT SX in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex COCKPIT SX

Multiplex COCKPIT SX User Manual - German - 83 pages

Multiplex COCKPIT SX User Manual - Dutch - 17 pages

Multiplex COCKPIT SX User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info