467082

Multiplex Cockpit MM Manual

9
Zoom out
Zoom in
Previous page
1/48
Next page
9
4.1.4. Fitting the transmitter crystal
First open the transmitter (Fig. I). Transmitter crystals are fitted with a blue plastic
sleeve and bear the code letter „S“ before the channel number. Check also that the
crystal is correct for your transmitter’s frequency band.
You can tell the frequency band of any MULTIPLEX transmitter by the colour of the
aerial wire (flexible wire from the main circuit board to the aerial):
• orange = 35 MHz band
• green = 40 MHz band
• red = 72 MHz band
Fit the transmitter crystal in the appropriate socket on the main circuit board
(see Fig. II).
Please be very careful when handling crystals:
• Don’t let them fall
• Don’t force them into the socket
• Don’t subject them to vibration in use or in storage
4.1.5. The transmitter sticks
The sticks of the COCKPIT
MM
transmitter feature:
• variable spring tension
• selectable self-neutralising action or ratchet (non-neutralising)
• height-adjustable stick tops
Adjusting the stick tension (see Fig. III)
The sticks of your transmitter are fitted as standard with neutralising springs. This
means that the sticks always return to centre when you release them. You can ad-
just the spring tension to suit your personal preference by rotating the M2 x 16
cross-point screws. Turn the corresponding screw clockwise to increase spring ten-
sion, and anti-clockwise to reduce spring tension.
Activating the stick ratchet (Fig. IV)
As standard the transmitter is supplied with all four primary stick functions self-
neutralising. However, for many functions (e.g. throttle or spoilers) the neutralising
action is not required. For this reason any of the sticks can be converted from
„spring-neutralising“ to „ratchet“ operation if required. The parts required for the
conversion are supplied in a separate plastic bag in the transmitter packaging.
This is the procedure for activating the ratchet:
1. Disable the neutralising spring
Locate the M2 x 16 cross-point screw in the accessory bag and screw it fully into
the plinth designed for it.
2. Now screw the ratchet spring to the stick unit frame using the cross-point 2.2 x
6 mm screw.
Caution: don’t over-tighten the screw, otherwise you could strip the threads in
the plastic.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Cockpit MM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Cockpit MM in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex Cockpit MM

Multiplex Cockpit MM User Manual - German - 48 pages

Multiplex Cockpit MM User Manual - French - 48 pages

Multiplex Cockpit MM User Manual - Italian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info