629100
14
Zoom out
Zoom in
Previous page
1/18
Next page
Operating Manual English
11
Mulching
Various appliances can also mulch
when fitted with the corresponding
accessories. Ask your specialised
dealer for details.
Note
This appliance is designed to mow
lawns. Do not mow scrub, weeds,
or overlong grass.
Switching off the machine
Stopping the unit:
Release the accelerator press
brake pedal until the appliance
is stationary.
Switching off the cutter deck.
Set the throttle lever into the
middle position.
Raise the cutters to the top.
After 20 seconds set ignition
key to .
Engage the locking brake before
leaving the appliance.
Remove the ignition key.
Pushing the appliance
Fig. 9
Push the appliance only when the
engine is switched OFF.
Release the parking brake.
Release both gears:
Pull out both gear release
levers and press to the right.
Before starting the engine
move back the two gear release
levers to their home positions.
Note
Never tow the appliance. This can
cause serious damage to the
gears.
Tips on lawn care
Mowing
A lawn is made up of various
different types of grass. If you mow
your lawn frequently, those types of
grass which form strong roots and
a firm turf surface will grow better. If
you seldom cut the grass, you will
enhance the development of high-
growing types of grass and other
weeds, such as clover, daisies ...).
The normal height of a lawn is
approx. 4–5 cm. Only
1
/
3
of the total
height should be mown; therefore
cut 7–8 cm long grass to normal
height.
Preferably do not cut the lawn
shorter than 4 cm, otherwise the
sward will be damaged in a dry
period. If the grass has grown
particularly high (for example,
during a holiday period), cut it back
to its normal height in several
stages.
Mulching using the accessories
(optional)
During mowing the grass is cut into
small pieces (approx. 1 cm) and is
left on the ground. A lot of the
nutrients in the cut grass are
retained for the benefit of the lawn.
Please note the following:
Do not mow wet grass.
Never mow more than max. 2 cm
of the total grass length.
Drive slowly.
Use maximum engine speed
Clean the mower cover regularly.
Transporting the mower
Drive the machine only short
distances otherwise transport it
by vehicle. Use a transportation
vehicle for greater distances.
Note:
The mower is not approved for
public thoroughfares in accordance
with StVO.
Short distances
Danger
Solid objects may be hit/propelled
by the rotating cutting mechanism
causing damage.
Always switch off the cutting
mechanism before moving the
mower.
Long distances
Warning
Transport damages
The mode of transport used (e.g.
transport vehicle, loading ramp)
must be used in accordance with
guidelines (refer to the respective
operating instructions).
When transporting, secure the
mower against slipping.
Environmental hazard due
to leaked fuel
Do not transport the mower
in a tilted position.
Prepare a suitable transport
vehicle.
Attach the loading ramp to the
vehicle.
Manually push the machine in
neutral onto the loading ramp.
Release gears beforehand.
To do this, pull out both gear
release levers (12, Fig. 1; near
each back wheel) and then press
them to the right.
Lock the parking brake.
Secure the machine to prevent
it from moving.
Cleaning/servicing
Danger
Injury hazard if engine is started
inadvertently
Protect yourself against injury.
Before carrying out any work on
the mower
switch off the engine,
withdraw the ignition key,
lock the parking brake.
Wait until all moving parts have
come to rest and the engine has
fully cooled,
Remove the spark plug
connector on the engine in
order to prevent the engine
from accidentally being started.
Cleaning the mower
Clean the unit
Warning
Do not clean the machine with
a high-pressure cleaner.
If possible, clean the machine
directly after mowing.
Place the machine on firm,
level ground.
Lock the parking brake.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MTD Zero Turn Serie RZT-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MTD Zero Turn Serie RZT-S in the language / languages: English as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD Zero Turn Serie RZT-S

MTD Zero Turn Serie RZT-S User Manual - German - 18 pages

MTD Zero Turn Serie RZT-S User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info