507839
16
Zoom out
Zoom in
Previous page
1/25
Next page
User manual English
13
Fig. 19
The length of the lower transverse
link bracing at each of the lower
transverse links limit the lateral
movement of the lower transverse
links. Loosen the counter nuts (a)
and turn the hex collar (b) in order
to adjust the length of the lower
transverse link bracing.
After setting, retighten the
counter nuts.
Note
In order to lift an attachment using
the 3 point attachment device, the
engine must be running.
Fig. 9
Lowering the
attachment (a)
Push the central hydraulics lever
forwards (this also works when
the engine is switched off).
Lifting the
attachment (b)
Push the central hydraulics lever
back.
Note
The height that the attachment is set
at can be altered by pushing the
central hydraulics lever. The lowest
setting is the ‘floating setting’.
Remove the tractive unit
protection
=t~êåáåÖ
låäó=êÉãçîÉ=íÜÉ=íê~ÅíáîÉ=ìåáí=
éêçíÉÅíáçå=áÑ=íÜÉ=íê~ÅíáîÉ=ìåáí=áë=ìëÉÇK
Fig. 20
Loosen the 2 screws (a).
Pull the tractive unit protection (b)
out laterally under the screws and
remove the drive shaft (c).
If the PTO is no longer used:
slide the tractive unit protection
over the tractive unit and slide it
laterally under the screws.
Tighten the screws.
Engaging the cutting
mechanism or other driven
accessories
Start the engine.
Set the throttle lever into the
middle position.
Engage
Switch on the PTO-switch.
Move throttle to .
Lower the cutting mechanism
or accessory (as used) using the
hydraulics.
Note
The indicator needle should be in the
green area of the revolution counter.
Disengage
Switch off the PTO-switch.
Lift the cutting mechanism or
accessory (as used) using the
hydraulics.
Note
When the tractor is being operated
with the PTO, the safety lock feature
will
switch off the engine automatically
if the driver leaves the driver seat,
automatically deactivate the PTO
if the unit is driven in reverse.
To turn on the engage switch (PTO)
on again, you must first switch it off
and then switch it on again.
Important note
The PTO does not normally work if
the tractor is driven in reverse. In
order to employ PTO even when
driving in reverse, the PTO switch
operation must be switched on for
driving backwards.
Using the PTO-switch for
reverse driving
t~êåáåÖ
_É=é~êíáÅìä~êäó=Å~êÉÑìä=ïÜÉå=ÇêáîáåÖ=
áå=êÉîÉêëÉ=ÖÉ~ê=ïáíÜ=íÜÉ=mql=
~Åíáî~íÉÇK=båëìêÉ=íÜ~í=~ää=éÉêëçåë=
~êÉ=çìíëáÇÉ=íÜÉ=ïçêâáåÖ=~êÉ~=çÑ=íÜÉ=
ìåáíK
With the PTO switch for reverse
driving, it is possible to use the PTO,
even when reversing.
First of all, the PTO must be
switched on using the PTO
switch.
In order to activate the function,
press the PTO switch at the front
downwards. The PTO switch for
reverse driving lights up.
Important note
After switching on, this function
remains active until the ignition key is
turned to OFF for at least 20 sec,
regardless how often the PTO is
switched on and off using the PTO
switch in the meantime. If the PTO
switch for reverse driving lights up,
the system is activated.
Using the upper transverse
link fixture
Fig. 21
The fixture hooks serve to secure
the upper transverse link of the
3 point attachment device, if this
is not used.
Hold the upper transverse link (a)
upwards, lift the hook rod (b) and
slide it fully to the left so that it
slides vertically into the right slot
of the fixing clamps.
Lower the upper transverse link
into the hooks on the rod.
In order to unclamp the upper
transverse link, lift the upper
transverse link from the securing
hooks and then slide the hook rod
completely to the right and swivel
it downwards.
Using the towing device
Fig. 22
Use the towing device (a) only to
pull acessories hanging at the rear
(e.g. trolleys, trailers) or to pull
objects away.
Bring the upper transverse links (b)
of the 3 point attachment device into
the highest position so that they do
not collide with the attached
acessory (e.g) trailer.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MTD CubCadet serie 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MTD CubCadet serie 6000 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD CubCadet serie 6000

MTD CubCadet serie 6000 User Manual - German - 26 pages

MTD CubCadet serie 6000 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info