779187
37
Zoom out
Zoom in
Previous page
1/165
Next page
3.4. Cleaning and maintenance
a) Cleaning and maintenance
Pull the mains plug and let the unit cool down completely before cleaning,
adjusting or replacing accessories and when the unit is not in use.
Wait until the rotating parts stop.
b) Use only non-corrosive cleaning agents for cleaning the surfaces.
c) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d) Do not spray the unit with a stream of water or immerse it in water.
e) Make sure that no water enters through the ventilation openings in the casing.
f) Clean the ventilation openings with a brush and compressed air.
g) Perform regular inspections of the unit checking technical fitness and any
damages.
h) Use a soft cloth for cleaning.
i) Replace the engine oil regularly with fresh oil.
To change engine oil, it is best done when the oil is warm because it is thinner
and flows more easily. First unscrew the oil filler cap and then the drain plug,
first putting a container for used oil underneath it. After draining the oil, close
the drain plug tightly and wipe dry the area around it from the rest of the used
oil. You can refill the engine with fresh oil.
CAUTION: heated oil is hot - risk of burns!
j) Inspect and clean the air filter regularly and replace with a new one if
necessary.
Removing the air filter: To access the air filter, undo the clips on the housing
cover and remove the filter. Rinse the sponge filter in warm water with
detergent or in extraction gasoline. Dry the sponge filter completely before
reassembly, then soak it in a little fresh engine oil.
Squeeze excess oil out of the filter before installing it in the machine.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MSW MSW-PG2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MSW MSW-PG2200 in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info