Manual MSW MSW-PG2200 (page 36 of 165) (English, German, Danish, French, Italian, Spanish)

779187

Zoom out

Zoom in

1/165

handle in your hand at all times even as it returns to the starting

position. Repeat this motion until the engine starts.

g) Allow the engine to run at suction for about 1-3 minutes to reach

operating temperature.

h) After the generator has warmed up, turn off the suction (turn the

throttle valve smoothly to the "OPEN" position). You can connect 230V

AC receivers to the sockets, observing the rule to connect in the order

starting from the receiver requiring the highest starting current to the

lowest. In the case of 12V receivers, connect them to the appropriate

poles before starting the generator, paying attention to the correct

polarity.

i) Turn the installation switch to the "ON" position and you can use the

connected receivers.

3.3.3 Switching off the generator

a) Turn the installation switch to the "OFF" position.

b) Also turn the ignition switch to the "OFF" position - this will turn off the

engine.

c) Close the fuel valve - move its lever to the "OFF" position.

IMPORTANT: in the case of emergency generator shutdown: turn the ignition

switch to the "OFF" position - the engine will stop. Then close the fuel valve.

3.3.4 TRANSPORT AND STORAGE

If the equipment is not to be used again, cool it down completely before

transporting. For transport, it is advisable to empty the fuel tank to prevent

any fuel leakage during transport.

If the unit is not used for a period of 1-2 months, empty the fuel from the tank

or pour fresh fuel and add stabilizer to it.

If the unit is not used for more than a few months, additionally empty the

carburetor of fuel (dropping tank) and drain oil from the engine.

Do not keep fuel in the tank with stabilizer longer than recommended by the

manufacturer of this additive.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MSW MSW-PG2200 in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1.96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MSW MSW-PG2200 Manual

Product: