749030

Mr Safe Personal security system Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
English
4
If you want to switch back the mr Safe station to tone-operated,
you have to follow this procedure:
• Press PROG.
• Press 3 and then 0.
• Again press PROG.
After pressing 0, you will see TON appear on the display.
If you have a switching system or ISDN adapter, you have to set
the same at ‘direct outward dialling system’. This way, it is not
necessary to dial an extra 0 prior to the telephone number.
CHECKING THE INSTALLATION
If the telephone line, adapter and batteries are properly placed,
the device is in standby, and the green ‘Power’ LED is burning.
If also the red ‘Batt. Lo’ LED is burning, the batteries are almost
empty or not properly placed. In this case, the batteries need to
be replaced. If you press one of the alarm keys of the mr
Safe station or remote control for at least 2 seconds, you will
hear the alarm tone from the mr Safe station. As soon as
this tone stops, the mr Safe station will contact the care
providers. To this effect, you need to set the telephone
numbers and alarm messages first. This is described in the
following chapters.
SETTING CALLS TO CARE PROVIDERS
(FAMILY, NEIGHBOURS, ETC.)
The mr Safe system has 2 different alarm buttons, a red one
and a blue one. These can be set distinctively, in various
ways: for example loud and quiet alarm, urgent and less
urgent alarm, or day and night alarm. It is possible to enter
a maximum of 4 telephone numbers per alarm button, eg.
of family, neighbours, acquaintances etc., the so-called
informal care.
The setting of these telephone numbers is realized as follows:
• Press PROG.
• Press the alarm button where you want to enter a
telephone number.
• Choose 1, 2, 3 or 4 for the first, second, third or fourth
alarm number.
• Enter the telephone number.
• Press PROG.
We advise you to write down the entered telephone numbers
in this manual. See last page of the manual. Apart from
that, it is possible to verify the set telephone numbers:
• Press PROG.
• Press the alarm button of which you would like to
verify the numbers.
• Press 1, 2, 3 or 4 for the first, second, third or
fourth alarm number.
• Now the set number is displayed. Press STOP to exit.
M_mr.Safe_GB.pmd 23.12.2004, 16:184
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mr Safe Personal security system at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mr Safe Personal security system in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info