- 18 -
user’s operations are wanted. In this case, 00:00:03 will flash at the rate of
once per second.
Button Function in the Pause Interface :
z Short-Press of PLAY/A-B: To return to the Recording interface to resume
recording.
z Long-Press of PLAY/A-B: To return to the Stop interface and save the
recording in the file system.
z LAST, NEXT, Vol+ and Vol-: Disabled.
5.4.1 Stop recording when the electronic signal level is too low.
During the pause, if the electronic signal level is too low, the recording file will
be saved, and then the player will return to the Stop interface.
5.5 Auto Off
In the Stop interface or the Pause interface and its sub-interfaces, if the idle
time reaches the setting value in the system management, the player will go
into the Standby mode, and the recorded sound in the Pause interface will be
saved.
6 Play REC
Realize the playback of *.WAV and *.ACT files. It has the following interfaces:
Playing, Local folder Selection, Delete, as well as function selection and
settings interfaces.
6.1 Functions in the Stop Interface
Note: When you enter into the Stop interface, the information about the
current playing of recorded sound will be displayed and user’s operations are
wanted.
The interface is as shown in the Fig below.
<Recorded File Playback>
z 00:00:03 is the time display for playing the recorded sound.
z 01/15 represents the order of current recorded file and the total number
of recorded files in the current directory.
z REC01 is the filename and 2004/3/15 10:23 is the date and time when the
file was created. (They will not scroll when the playing of the file stops.)
Button Function in the Stop Interface
z Long-Press of MODE: To enter into the main menu.
z Short-Press of MODE: To enter into the Stop Menu interface.
z Short-Press of PLAY: To start playing the recorded sound.
If the current file is an invalid musical file, then the message “Format
Error” will pop up. Two seconds later, the player will return to the Stop
interface.
z Long-Press of PLAY: To turn the player off.
