803722
8
Zoom out
Zoom in
Previous page
1/18
Next page
Technical modifications, changes and errors excepted
www.mpfdrive.com 11
Technical modifications, changes and errors excepted
www.mpfdrive.com 12
CURRENT CADENCE :
The Current Cadence shows the pedal revolution per minute (rpm).
CLOCK: 12HR OR 24HR CLOCK :
Clock can be displayed either in 12HR or 24HR format.
TRIP DISTANCE :
The Trip Distance function accumulates the riding distance from the last RESET.
RIDE TIME :
The Ride Time accumulates the riding time from the last RESET.
AVERAGE SPEED :
Average speed is calculated from the Trip Distance divided by the Riding Time
counted from the last RESET.
MAXIMUM SPEED :
Shows the Maximum Speed from the last RESET.
When choosing RPM on the screen actual pedal cadence will be shown.
To achieve best system efficiency the up or down ↓ “cursor” indicates when to
shift the bicycle gears.
BOOST MODE :
When activating the Boost function the e-bike will move independently up to a
speed of rd. 4~6kph (2.5~3.8mph)
The function may be only used when pushing the bike.
as long as the button will be kept pressed.
GEAR SHIFT INDICATOR :
REMAINING RANGE :
Estimated range of the installed battery-pack charge (estimation based on constant
conditions of assistance level, route profile, etc.). Function is available only in
combination with CAN bus batteries.
DISPLAY INFORMATION
Press button M to switch between displayed information.
ODOMETER :
The ODO accumulates the total riding distance from the last All Clear operation.
DATA RESET MODE :
Press R button to reset data to 0 for DISTANCE, RIDETIME, AVERAGE,
and MAXIMUM.
Data Reset only available with bike in standstill position.
When ”Err” appears on the display, check the correct
positioning of the speed sensor.(FIG. A)
symbol.(FIG. B): Temperature of the motor unit
too high. Allow the motor to cool down. Continued
travel without motor support is possible and speeds up
the cooling process.
SUPPORT LEVEL
The level of assistance when pedaling can be adjusted via the control unit and will
be shown on the display C .
The assistance level can be changed anytime, even during riding.
In total 10 assistance levels can be chosen to get the right power support for your
actual riding situation.
Press + button L to increase or – button R to decrease the support level by one step.
If you keep the button pressed the support level will continuously in- or decrease.
The support level is shown on the display A .
By decreasing the support level to “zero” no support from the motor will be given and
the e-Bike can be operated as a normal bicycle through pedaling.
Level 1
Level 1 : 50% support, effective assistance for
maximum riding range
Level 5 : 120% support, powerful assistance for
city and off road rides
Level 10 : 250% support, maximum assistance for
steep climbs and sportive riding
experience.
Level 5 Level 10
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MPF Drive System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MPF Drive System in the language / languages: English, German as an attachment in your email.

The manual is 3.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info