765494
32
Zoom out
Zoom in
Previous page
1/42
Next page
EN - 5
Stop.
6. USING THE MACHINE
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
serious risks or dangers.
6.1 PRELIMINARY PROCEDURES (Fig.16)
Make sure the safety key is not inserted in its housing.
Do this when the blade is stationary.
6.1.1 Checking the battery (Fig.17)
6.1.2 Preparing the machine before starting work
NOTE This machine can be used to mow lawns in a
number of dierent ways; before starting work, prepare
the machine based on how the lawn is to be mowed.
a. Preparation for grass cutting and
collection in the grass catcher (Fig.18)
b. Preparation for mowing and grass rear
discharge onto the ground: )
1.
c. Preparation for mowing and mulching (Fig.20)
6.1.3 Cutting height adjustment (Fig.21)
6.1.4 Handle inclination adjustment Fig.8, Fig.12)
6.2 SAFETY CHECKS
Always carry out the safety checks before use.
6.2.1 General safety check
Object Result
Grips Clean, dry.
Handle 
Blade Clean, not damaged or
worn, well sharpened.
Rear discharge guard;
grass catcher
Good condition. No
damage. Properly installed.
Replace if damaged.
Control lever The lever must move
freely, it must not need
forcing and should
return automatically
and rapidly back to
the neutral position.
Battery No damage to the casing,
no liquid leakage.
Screws/nuts on the
machine and on the blade
Correctly tightened
(not loose). Not
damaged or worn.
Machine No signs of damage
or wear. No abnormal
vibrations. No
abnormal sound.
Action Result
1. Start the machine (par.
6.3).
2. Release the switch

1. The blade should
move.
2. The lever should
automatically and
quickly return to
neutral position, the
engine must switch

must stop within
a few seconds.
If any of the results fail to match the indications
provided in the tables, do not use the machine! Contact
a service centre to have it checked and repaired if
necessary.
6.3  (Fig.23÷25)
Ignition of the motor simultaneously engages the
blade.
6.4 OPERATION (Fig.26)
IMPORTANT If the motor stops because
it is overheated whilst mowing, you must wait
approximately 5 minutes before restarting it.
6.4.1 Grass cutting (Fig.27, Fig.28)
NOTE Regulate the forward speed and the
cutting height considering the conditions of the
lawn (the height, density and dampness of the
grass) and the amount of grass collected.
6.4.2 Emptying the grass catcher 
6.5 STOP 
The blade will continue to rotate for a few seconds
after disengagement or after you have switched o the
motor.
IMPORTANT
|
Always stop the machine:
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mountfield EL 380 Li 48L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mountfield EL 380 Li 48L in the language / languages: English, Italian as an attachment in your email.

The manual is 10,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info