765491
14
Zoom out
Zoom in
Previous page
1/86
Next page
14
ENGLISH
EN
The quick connections allow the deck to be moved
easily between the two positions:
Normal position with fully tensioned belt.
4 cm behind the normal position with slackened
belt so that the deck gets closer to the base
machine.
As the belt idler is released from the belt, the quick
connections simplify belt and deck replacement,
and also make shifting to the washing position and
service positions easier.
Releasing the belt tension:
1. Remove the locking pins (12:G) from both
sides.
2. Open the quick connections by depressing their
rear sections with your heel. See (12:F).
When the quick connections are
opened, the deck arms rest loosely in
the shaft sections. The deck must never
be set to the service position or washing
position without relocking the quick
connections after unhooking the deck
belt.
3. Carry out the necessary corrective action, e.g.:
Unhook the belt.
Replace the deck by unhooking the deck
arms. See fig. 14.
Tensioning the belt:
First tension one side and then the other according
to the instructions below.
Do not turn the lever using your hands.
Risk of crushing injuries.
1. Place your foot on the lever (13:J) and carefully
turn a half turn forwards.
2. Install the locking pin (12:G).
3. Carry out the above on the other side.
5 AREAS OF USE
The machine may only be used using genuine
GGP accessories, e.g.:.
The maximum vertical load on the towing hitch
must not exceed 100 N.
The maximum over-run load on the towing hitch
from towed accessories must not exceed 500 N.
NOTE! Before using a trailer – contact your insur-
ance company.
NOTE! This machine is not intended to be driven
on public roads.
Operation Accessories, GGP original
Mowing Using mowing decks:
4140H: 95 C
4155H: 95 C, 105 C
4155H 4WD: 95 C, 105 C
Snow clearance With snow blade. Snow chains
and frame weights
recommended.
Grass clipping and
leaf collection With towed collector 38".
Grass and leaf
transport With dump cart Combi.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mountfield 4155H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mountfield 4155H in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info