721107
16
Zoom out
Zoom in
Previous page
1/104
Next page
EN
16
3.1 - FITTING THE MINCER ATTACHMENT
Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.
Place the attachment (E) and lock it in the anti-clockwise direction such that the outlet is in alignment
with the appliance.
Place the multi-function head (A3) in the horizontal position by pressing the button (a2) once again.
3.2 - ASSEMBLING THE MINCER HEAD
Hold the body (F1) by the feed tube, with the wider opening uppermost.
Insert the feed screw (F2) (long shaft first) into the body (F1).
Fit the blade (F3) onto the short shaft protruding from the feed screw (F2) with the cutting edges facing
outwards.
Fit the chosen screen (F4 or F5) on the blade (F3), aligning the two lugs with the two notches in the
body (F1).
Screw the nut (F6) home on the body (F1) in the clockwise direction, without locking it.
Check the assembly. The shaft should have no play, neither should it be able to turn on its own. Otherwise,
repeat the assembly procedure.
3.3 - FITTING THE MINCER HEAD ON THE APPLIANCE
Facing the attachment outlet (E), insert the assembled mincer head (F) inclined to the right, aligning
the two bayonets in the mincer head with the two notches in the attachment. Push the mincer head
home into the attachment and turn the mincer head anti-clockwise until it latches with the feed tube in
the vertical position.
Place the removable tray (F8) on the feed tube.
3.4 - USAGE, TIPS AND DISMANTLING
Make sure that the safety cover (A5) is locked correctly (clockwise) on the high-speed outlet (a4).
Place a container to collect the preparation in front of the appliance.
Run the appliance by turning the selector (A1) to speed "3" or "4".
Push the meat, piece by piece, down the feed tube, using the pusher (F7). Never push the ingredients
down the feed tube with your fingers or any other utensil.
- You can chop up to 3 kg of meat (gristle, bone and sinew removed).
- Maximum time of use: 10 minutes.
Leave your appliance to cool down completely before using again.
To stop the appliance, turn the selector to "0" speed and wait for the appliance to come to a complete
stop.
Unlock the mincer head in the reverse order of the assembly.
Tips:
- Prepare all of the foodstuffs to be minced (for meat, remove the bones, gristle and tendons and cut it
into pieces of approximately 2 x 2 cm).
- Make sure that frozen meat is thoroughly thawed.
- At the end of the operation, you can feed a few small pieces of bread into the feed tube to clear any
meat remaining in the machine.
4 - GRATING / SLICING (DEPENDING ON MODEL)
ACCESSORIES USED :
- Attachment holder (E)
- Assembled vegetable slicer (G)
- Drums (depending on model)
4.1 - ASSEMBLING THE ACCESSORIES
Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex QA4081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex QA4081 in the language / languages: All languages as an attachment in your email.

The manual is 11,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info