Manual Moulinex MO2521 (page 16 of 42) (English, German, Dutch, French)

721010

Zoom out

Zoom in

1/42

• Assemble the HEPA filter case (14): black foam filter (14a) and HEPA filter (14b) under the dust tray (13) –

Fig. 22, then replace the dust tray inside its compartment (7) – Fig. 18.

5.2. MICROFILTER (8A) – Ref. MT0056.01

Important: Change the microfilter* every 6 months.

The microfilter ref. MT0056.01 is available at your local retail store or at one of our Authorized Service Centres.

• Remove the motor protection grill (8b) - Fig. 40.

• Remove the microfilter (8a) – Fig. 41 – and keep the motor protection grill (8b).

• Throw the microfilter (8a) in the bin – Fig. 42.

• Place a new microfilter (8a) on the motor protection grill (8b) - Fig. 43.

• Slide the ledges into the slots - fig. 44.

• Screw on the motor protection grill (8b) - Fig. 45.

• Before placing back the dust tray, make sure that the motor protection grill is placed properly.

Cleaning the vacuum cleaner

• Wipe the body of the vacuum cleaner and accessories with a soft damp cloth, then dry.

• Wipe the lid with a dry cloth - fig. 46.

• Do not use any detergents, or corrosive or abrasive products.

Important: If you notice that your vacuum cleaner is not operating well, switch it off using the ON/OFF

pedal before carrying out any checks.

If your vacuum cleaner will not start

• The appliance is not plugged in : check that the appliance is correctly plugged in.

If your vacuum cleaner has no suction power

• Either an accessory or the hose tube is partially blocked: unblock the accessory or the hose.

• Check that the dust tray is placed properly inside its compartiment.

If your vacuum cleaner is not working properly, makes noise or whistles

• Either an accessory or the hose tube is partially blocked: unblock the accessory or the hose.

• The dust tray is full: empty it (see chapter on CLEANING AND MAINTENANCE).

• The filtration system is saturated: clean the HEPA filter case (14) (see chapter on CLEANING AND

MAINTENANCE). If the problem persists, change the filtration system (see chapter on CLEANING AND

MAINTENANCE).

• Make sure that the dust tray (13) is well positioned in the dust tray compartment (7).

• The manual vacuum power regulator on the grip is open: close it.

If it is difficult to move the nozzle

• Open the regulator on the handle in order to decrease suction power.

• Make sure that the position of the all-surface nozzle (23) corresponds to the floor being vacuumed:

- for rugs and carpets, use the nozzle in the retracted brush position,

- for parquets and smooth grounds, use the nozzle in the exterior brush position.

If the power cord does not wind completely

• The cord slowed down as it was winding up: pull the power cord out again and press the power cord wind

button.

If your vacuum cleaner stops during vacuuming

• The thermal security system has been activated. Make sure that the hose or tube are not blocked and that the

filters are not saturated. Let cool for 30 minutes before restarting the vacuum cleaner.

If a problem persists, take your vacuum cleaner to your local Moulinex Approved Service Centre or

contact a Moulinex customer service office.

6. TROUBLESHOOTING

*Depending on model: it means special equipment for some models or optional accessories.

903398-01_MO25_city-space-cyclonic_903398/01 11/07/13 09:51 Page11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex MO2521 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex MO2521 Manual

Product: