Manual Moulinex MO2521 (page 14 of 42) (English, German, Dutch, French)

721010

Zoom out

Zoom in

1/42

Assembling the appliance

• Firmly place the tube (19) in the vacuum opening (10) and turn to screw on – fig.1. To withdraw the tube,

turn in the opposite sense and pull – fig.2.

• If your vacuum cleaner is equipped with a telescopic tube* (20) : push the adjustment button forward, pull

out the tube as much as necessary and then release the button to block it – fig. 3. Otherwise, assemble both

tubes* (21) by turning them slightly – fig. 4.

• Attach the tube extension* (22) if necessary.

• Fit the corresponding accessory to the end of the tube or butt:

WARNING: Always switch off and unplug your vacuum cleaner before changing any accessories.

- For rugs and carpets: use the multi-surface nozzle (23) in the retracted brush position (fig. 5) or the

Turbobrush* (fibers and animal hairs) (27* or 28*).

- For wood and hard floors: use the multi-surface nozzle (23) in the exterior brush position (fig. 6) or, for best

results, use the parquet nozzle* (24).

- For corners and hard to reach spots: use the crevice/brush nozzle (26) in the flat position.

- For upholstery and delicate surfaces: use the brush side of the crevice/brush nozzle (26) or the upholstery

nozzle* (25).

Pluging in the power cord and starting the appliance

• Unwind the power cord completely, plug in your vacuum cleaner (fig. 7) and press the ON/OFF pedal. On/Off

(2) – fig. 8.

• Set the suction power using the manual power control located on the grip: increase the control opening in

order to manually diminish the vacuuming power, for example on fragile surfaces… – fig. 9.

Storing and transporting the appliance

• After use, switch off your vacuum cleaner by pressing the ON/OFF pedal (2) –fig. 8- and unplug it (fig. 10).

• Rewind the power cord by pressing the power cord rewind pedal (3) - fig. 11.

• In the vertical position, place the nozzle (23) in its compartment under the appliance (1b) – fig. 12.

• In the horizontal position, place the nozzle (23) in its compartment at the back of the appliance (1b) – fig.

13.

• Transport your vacuum cleaner easily thanks to its transport handle (6).

Important: Always switch off and unplug your vacuum cleaner before maintenance or cleaning.

Warning: remember to stand over a bin every time you clean the dust tray.

Remove the dust tray (13)

• Withdraw the tube (19) from the vacuum opening (10) - Fig.2.

• Remove the dust tray (13) from its housing (7) : take the tray handle (13a) and remove the tray – fig. 14.

1. EMPTY THE DUST TRAY

Important: Empty the dust tray (13) after each use.

• Press on the opening lever (13c) –

fig. 15a—and then remove the lid – fig. 15b.

• Empty the tray over a bin – Fig. 16.

• Make sure that no dust remains inside the tray.

• Place the lid back: place the stops in their slots – fig. 17a – and close the lid – fig. 17b.

• Replace the tray (13) in its compartment (7) – Fig. 18.

2. CLEANING THE BLACK FOAM FILTER (14a)

Important! To optimise the performance of your vacuum cleaner, make sure you clean the foam (14a) each

time you empty the dust tray (13).

• Pull simultaneously on the opening clips (13d) of the HEPA filter case -

Fig.19.

• Separate the black foam filter (14a) from the HEPA filter (14b) - Fig. 20.

• Wash the black foam filter (14a) under the tap, squeeze it out like a sponge and leave to dry for 12 hours -

fig. 21.

5. CLEANING AND MAINTENANCE

4. USE

*Depending on model: it means special equipment for some models or optional accessories.

903398-01_MO25_city-space-cyclonic_903398/01 11/07/13 09:51 Page9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex MO2521 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex MO2521 Manual

Product: