535109
13
Zoom out
Zoom in
Previous page
1/102
Next page
9
Do not use your appliance if it does not operate correctly, if it has been damaged or if the power
cord or plug is damaged. To maintain safety, these parts must be replaced by an Approved
Service Centre.
Any intervention other than normal cleaning and maintenance by the customer must be
performed by an Approved Service Centre.
For you own safety, only use accessories and spare parts from the appliance manufacturer,
which are especially designed for your appliance.
Safety locking
The appliance will not operate if the blender jug assembly (D) or the accessories (E) or
(F) are not correctly positioned and locked on the motor unit (A).
Before first use
Before using your appliance for the first time, clean all the accessories (D, E, F) in warm
water and washing up liquid, except for the motor unit (A).
CAUTION: The blades are extremely sharp; handle them with caution when using
or cleaning the appliance and when emptying the bowls or jug.
Make sure all the packaging has been removed before operating the appliance.
Important note: Turn the speed selector (B) to “0” before placing the blender assembly
or accessories on the motor unit.
Do not turn the blender on if the lid (D6) is not properly in place on the blender jug
(D4).
Use
Using the blender
Before assembling the jug (D)choose the most convenient position for the jug handle (D4)
(on the right or on the left.).
With the "clic" button (D2) of the blades block (D1) in front of you, place the locating rib
(D3) in the assembly slot located at the base of the jug (D4) (fig. 1 a) then lower the blade
unit (D1) down into the second slot (D4) (fig. 1b) located at the front of the jug base until
the unit is locked in place (you will hear a click) (fig. 1c).
Make sure that the jug (D4) and the blade unit (D1) are well assembled, press the button
(D2) and place the ingredients in the jug without exceeding the maximum level indicated
on it:
* 1.5L for thick mixture
* 1.25 L for liquid mixtures
Make sure that the joint (D5) is on the lid (D6) (fig. 2 a) and place the two together on the
jug (D4).
Put the cap (D7) in the slot destined for it on the lid top.
Place the assembled blender jug (D) on the motor unit (A), with the "clic" button (D2)on the
blade unit aligned with the "clic" button (C) on the motor unit (Fig. 2b) and press the jug
down firmly to lock it on the motor unit (you will hear a double click) (Fig 3).
Plug in the appliance and turn the speed selector (B) to the desired position or press "Pulse"
a few times.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex LM2321 DOUBLE CLIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex LM2321 DOUBLE CLIC in the language / languages: All languages as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info