720937

Moulinex K08506 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
EN
Do not operate the appliance if :
•the container is empty,
•the blades of the cutting rotor are damaged,
•there is visible damage on the appliance or it is not functioning properly,
•if the mechanism is blocked.
Always store the cutting rotor in its protective case, when you do not use the appliance.
This product is designed for household use and not professional use.
If it is used for professional purposes, the warranty will be void and no liability will be assumed.
USING
1. Remove all the parts from the box and clean them thoroughly by hand before using
for the first time. Please refer to the instructions under «Cleaning» section.
2. Place the container on a stable and dry working surface.
3. Remove the cutting rotor from its protective case.
4. Put the lifting aid on the table, it must be stable (otherwise just turn it). Hold the
wing with one hand and with the other hand hold the cutting rotor on the fixed wing
and the blades in the same position as the fixed wing (light green), then push the
cutting rotor from the top on the lifiting aid. It will lift up the herbs, garlic, chili
from the bottom of the container and chop it very finely. Remove lifting aid when
using other ingredients. - fig. C
5. Place the cutting rotor in the container with the blades above one another to
optimize the space for the ingredients you want to chop. - fig. D, E
6. Cut the big ingredients such as carrots or onions in a piece shorter than the length
of the blades so that they will not block the blades of the cutting rotor.
7. Then place them in the container while making sure that the cutting rotor will
remain straight.
8. Place the lid on the container making sure that the hexagon on the cutting rotor fits
into the recess in the lid.
9. Place one hand on top of the lid to hold the appliance down on the working surface.
Then use the other hand to grip the pull mechanism on the lid.
10. The first pulling motion needs to be done with strength and speed. Execute this
motion always in an horizontal way.
11. Maintain your grip while the pulling mechanism retracts and do not let it go.
12. If the blades of the cutting rotor become blocked, do not force. Remove the cutting
rotor to carefully remove the ingredients and cut them in smaller pieces before
putting back the cutting rotor in the container taking care of the alignment of the
blades to optimize the volume available.
13. The transparent container let you see the fineness of the cutting. Repeat the pulling
until you get the expected result. You need about 5 pulls for a first level of chopping
but it will also depend of the type of ingredient.
Livret Hachoir Rapido_Moulinex_C8744.indd 6 26/07/13 14:12
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex K08506 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex K08506 in the language / languages: All languages as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info