721087
8
Zoom out
Zoom in
Previous page
1/55
Next page
1110
• Fit the lid (b2) onto the bowl (b3). Lock the lid by pushing it to the right in the bowl handle.
It is essential to lock the bowl onto the motor drive
(a) before locking the lid (b2) onto the bowl (b3).
2: Removing the chopping bowl and lid
Unlock the lid by turning it clockwise to release the bowl handle. You will then be able to lift and remove it.
• Unlock the bowl by turning it clockwise.
• Only now will you be able lift and remove the bowl from the motor drive.
3 : Mixing/blending/chopping/kneading
ACCESSORIES USED:
Bowl assembly (b).
• Spindle (c).
• Multifunction blade
(d).
FITTING THE ACCESSORIES:
Place the bowl
(b3) onto the motor drive (a) and lock it in place.
Slide the multifunction blade (d) onto the spindle (c), and position the entire assembly on the motor drive (a1).
• Place the ingredients in the bowl.
• Place the lid (b2) and lock it on the bowl (b3).
• To remove the bowl-lid assembly: unlock the lid then unlock the bowl.
KNEADING/MIXING
Turn the speed selector
(a3) to position 2 to start it up.
You can knead up to:
- 1 kg of heavy dough, such as white bread dough, shortcrust pastry in 60 sec.
- 800g of special bread dough, such as rye bread, wholemeal bread, wholegrain bread, etc. in 60 sec.
You can mix up to:
- 1.2 kg of light cake mixture such as biscuit dough, pound cake, sponge cake, etc. in approximately 1 min
30 sec to 3 min.
You can also mix up to 1 litre of pancake or waffle batter in 1 min to 1 min 30 sec.
CHOPPING
Turn the speed selector
(a3) to position 2 to start, or for better control of chopping, use the pulse position.
You can chop up to 600 g of food such as:
- Raw or cooked meat (boned, trimmed and diced).
- Raw or cooked fish (skinned and filleted).
- Hard foods: cheese, dried fruit, some vegetables (carrots, celery, etc.).
- Soft foods: some vegetables (onions, spinach, etc.).
BLENDER
Turn the speed selector
(a3) to position 2 to start.
You can blend up to 1 litre of soup or stewed fruit in 45 sec.
4: Grating/slicing
ACCESSORIES USED:
Bowl assembly (b).
• Spindle (c).
• Cartridge of choice (f) (depending on model).
• Cartridge support (g).
FITTING THE ACCESSORIES:
Place the bowl
(b3) on the motor drive (a) and lock it.
Insert the selected cartridge (f) into the cartridge support (g), introduce the spindle
axle (c) as far as it will go through the cartridge (f), and lock the assembly, then
position it on the motor drive (a1).
Fit the lid (b2) and lock it on the bowl (b3)
Check that the
metal axle of
the spindle (c) is
inserted in the
centre of the lid
with measuring
tube (b2)
To remove the bowl-lid assembly: unlock the lid and then unlock the bowl.
The accessories contained in the model you have just purchased are represented on the label located on top
of the packaging.
CAUTION: the safety precautions are part of the ap-
pliance. Read them carefully before using your new ap-
pliance for the first time. Keep them in a place where you
can find and refer to them later on.
Description
Using your appliance
Before using for the first time, wash all parts of the accessories in hot soapy water (see section on cleaning).
Rinse and dry.
Place the motor drive (a) on a flat surface that is clean and dry.
Plug in your appliance.
Pulse (intermittent operation): turn the knob (a3) to Pulse position - using a succession of pulses can give you
better control when preparing certain foods.
Continuous operation: turn the knob (a3) to position 1 or 2.
Stop: turn the knob (a3) to position 0.
The numbering of the paragraphs corresponds to the numbering of the diagrams.
1: Fitting the chopping bowl and lid
ACCESSORIES USED:
Bowl assembly (b).
FITTING THE ACCESSORIES:
Place the bowl
(b3) on the motor drive (a), with the handle positioned slightly to the right of the button.
Lock the bowl (b3) by turning it to the right.
a Motor drive
a1 : Motor drive slow output
a2 : Motor drive fast output
a3 : Speed selector: Pulse position (intermittent
operation)-0-1-2
b Chopping bowl assembly
b1 : Pusher with measuring section
b2 : Lid with feeder tube
b3 : Bowl
c Spindle
ACCESSORIES DEPENDING ON MODEL:
d Multifunction blade
e Emulsifying disc
f Vegetable cutter cartridges
A: Fine grater
D: Fine slicer
C: Coarse grater
G: Rosti (potato cakes)/parmesan
H: Thick slicer
E: French fries cutter
g Cartridge holder
h Blender
h1 : Feeder cap
h2 : Lid
h3 : Jug
i Citrus press
i1 : Cone
i2 : Citrus press spindle
i3 : Filter basket
j Herb grinder
j1 : Lid
j2 : Herb grinder bowl
k Spatula
l Storage drawer
EN
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex FP3241 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex FP3241 in the language / languages: All languages as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info