535263
15
Zoom out
Zoom in
Previous page
1/44
Next page
11
double-sidedmetaltray(E9bis).BladesA
and B, in this case, are obtained by
turning the tray over (blade G cannot be
mountedinthis case).
Slide the blades (A, G, H)into the blade
holder disc (E9), place the blade holder
(E8) on the axis of the bowl (E), then
place the blade holder disc (E9) on the
blade holder (E8). Put the reducer (E6)
onthelid (E3).
Placethelid(E3)on thebowl andlockit.
Set the motor unit (A1) in position on
thelid.Turnon.
Introduce the food through the feeder
tube and push them down using the
pusher(E2),neverwithyourfingersor
anyotherutensil.
To dismantle, press theejectbutton(E7)
to remove the motor unit (A1) from the
reducer(E6)before removingthelid.
Unlock(E7)thelid(E3)toaccessthefood.
Carefully remove the blade holder disc
(E9) and the blade holder (E8) before
removingthefood.Thencarefullyremove
theblades(A,G,H)fromthebladeholder
disc(E9).
BladeA(Grater):carrots,cheese,celery,
etc.
Prepareamaximumof1000goffoodata
time(butnotmeatorcoldmeatproducts).
Blade H (Slice): raw sliced potatoes for
gratins, carrots, cucumbers, etc.
maximum800g.
Blade G (Parmesan): Parmesan, raw
potatoes.
Unplug the appliance, remove the
accessories.
The reducers (E6, F3 and the whisk
holderC1)aswell asthemotor unit(A1)
are not dishwasher proof; you can wipe
themwithadamp sponge.
Alltheother accessoriesaredishwasher
proof. Place the blender shaft (B1)
with the blade facing upwards in the
Cleaning
dishwasher. Do not use abrasive
sponges or objects that contain metal
parts.
Never plunge the motor unit (A1) into
water. Wipe it down with a dry or very
slightlydampcloth.
In the event that your accessories
become colour stained by foods such as
carrots, oranges, beetroot etc rub over
them immediately after use with a cloth
dipped in a little sunflower oil and then
cleanthemas usual.
HandlethebladesE4, E5,F2andI2
orbladesA,G,H with extremecare;
theyarevery sharp.
Start by checking the power cord and
plug,then:
Check that the lid (E3) to your
multifunction bowlisproperlylocked.If it
is not properly locked your motor unit
(A1) will not be able to make your
multifunction bowl work because the
reducer drive system (E6) will not
operate.
Check whether the appliance’s safety
system has not been activated, by
processingtoomuch mixtureorby using
theappliancefortoo long.Ifit has, leave
the appliance to cool down for around
30minutes.
Iftheliddoesnotlockproperly,pressthe
unlockingbutton(E7)onthereducer(E6)
beforelockingit again.
Refer to the “Usage” paragraph for
assemblyinstructions.
You have carefully followed all these
instructions, and yet your appliance still
doesnotwork?
PleasecontactourHelpline:
08456021454- UK
(01)4018448 -Ireland
orconsultourwebsite :
www.moulinex.co.uk
What do I do if my appliance
doesn’t work?
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex DD9081 OPTIPRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex DD9081 OPTIPRO in the language / languages: English, French, Italian, Turkish as an attachment in your email.

The manual is 9,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info