779575

Motorola ML25260 Manual

22
Zoom out
Zoom in
Previous page
1/35
Next page
22
8.11 Flash
If you subscribe to Call Waiting Caller ID service from your local telephone company and you
receive an incoming call during a call, you will hear a beep to indicate another call is waiting on the
line and Caller ID information (if available) for the waiting call shows on the display.
1. To connect to the waiting call, press FLASH and your first call will be put on hold.
2. To switch between the two calls, press FLASH.
8.12 Inserting a Pause in the Dialing Sequence
Press j twice to insert a delay in dialing sequence when a pause is needed to wait for a dial
tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone). Each
pause counts as one digit in the dialing sequence, and is shown as
P
in the display.
8.13 Redial
1. Pick up the handset, press s or HEADSET and the unit will select the first available line. If both
lines are available, Line 1 will be used first.
Or, press LINE 1 or LINE 2 button to select the line you want.
2. Press REDIAL. The redial number list (last 3 previously dialed numbers) is shown.
3. Using VOL + and VOL - of the navigation button to scroll to the number you want to redial.
4. Press
DIAL
softkey to dial the phone number.
NOTE
If the number you dialed is longer than 32 digitals, It will not be saved in the redial list and can’t
be redialed.
8.13.1 Viewing a Redial Record
Your phone records up to three previously dialed phone numbers.
1. In idle mode, press REDIAL.
2. Using VOL + and VOL - of the navigation button to scroll to the desired dialed numbers.
3. When the desired number is displayed, press s, HEADSET, a LINE button, or pick up the
corded handset to dial the phone number.
NOTE
If you do not select a LINE button, the line is automatically seized and the number is dialed
accordingly.
8.13.2 Adding a Redial Record in the Directory
1. In idle mode, press REDIAL.
2. Using VOL + and VOL - of the navigation button to scroll to the desired redial numbers.
3. Press
SAVE
softkey. The screen displays
ENTER NAME:
.
4. Using the dial pad to enter a name.
More than one letter is stored in each of the number keys. For example, to enter “Lorraine,”
press the 5 key three times for the letter L, press the 6 key three times for the letter O, press
the 7 key three times for the letter R, and so on.
If you make a mistake, press PREV or NEXT of the navigation button to move the cursor
forward or backward. Or, press DELETE to delete one character at a time.
A name must be input otherwise the record cannot be stored.
5. Press
SAVE
softkey. The screen displays
ENTER NUMBER:
with the desired redial number.
To edit the number, press PREV or NEXT of the navigation button to move the cursor forward
or backward. Or, press DELETE to delete one digit at a time.
6. When you are finished, press
SAVE
softkey.
7. Using VOL + and VOL - of the navigation button to scroll to the desired
VIP TONE MELODY
.
8. Press
SELECT
softkey to complete.
NOTE
If an incoming call number matches this record the VIP Tone Melody will ring.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25260 in the language / languages: English as an attachment in your email.

The manual is 2.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info