779575

Motorola ML25260 Manual

21
Zoom out
Zoom in
Previous page
1/35
Next page
21
8.4 Pre-Dialing
1. With the phone idle, manually enter the telephone number. The telephone number will show in
the display. The maximum pre-dialing number length is 32 digits, if the number is over
32 digits, it will emit an error tone.
2. You can either press
DIAL
softkey, s, HEADSET, LINE 1 or LINE 2 or pick up the corded
handset to take a line and the number will automatically be dialed.
8.5 Answering Calls
1. Pick up the corded handset to answer the call in the receiver mode.
Or, press s to answer the call in the speakerphone mode.
Or, press the corresponding LINE button to answer the call in the speakerphone mode.
Or, press HEADSET to answer the call in the headset mode.
2. When you are finished, hang up the corded handset.
Or, press s (if you are speaking in the speakerphone mode) to end the call.
Or, press HEADSET (if you are speaking in the headset mode) to end the call.
NOTE
You can adjust the call volume by pressing VOL + and VOL - of the navigation button during a call.
8.6 Switching Between the Speakerphone, Handset and Headset Mode
1. To switch to the speakerphone mode, press s. The speakerphone indicator illuminates. Place
the corded handset back into the cradle.
2. To switch to the corded handset, pick up the handset. The speakerphone or wired headset
indicator will turn o.
3. To switch to the wired headset, press HEADSET to enable the headset, and the headset
indicator illuminates.
8.7 Mute
To have a private, o-line conversation, use the Mute feature. The party on the other end of the
line cannot hear you, but you can still hear them.
1. During a call, press MUTE to activate the Mute feature.
2. Press MUTE again to de-activate.
NOTE
The Mute LED indicator will illuminate when the Mute feature is activated.
8.8 Auto Standby
If you place the handset in the cradle while the handset is o the hook (during a call), the call is
automatically disconnected.
8.9 Do Not Disturb (DND)
This feature is set at individual telephones to disable (silence) an incoming ring signal and
intercom ring. When there is an incoming call or an intercom call, the status indicators function as
normal but the phone will not ring.
1. In idle mode, press DND. The last setting is displayed.
2. Using VOL + and VOL - of the navigation button to select the duration. You can choose from as
short as
15 MINUTES
,
30 MINUTES
,
45 MINUTES
,
1 HOUR
or
2 HOURS
and increase the duration by
1-hour intervals up to
24 HOURS
.
3. Press
SELECT
softkey to save your selection. The DND LED indicator will blink and a DND
timer will appear on the display indicating how much time remains before the DND feature is
automatically turned o.
4. To turn o DND feature at any time, press DND.
8.10 Line Privacy
This feature will prevent other phones on the same system from accessing the line used by your
active call.
1. While on a call, press PRIVACY to activate the Line Privacy feature.
2. The screen will display
PRIVACY
.
3. Press PRIVACY again to de-activate.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25260 in the language / languages: English as an attachment in your email.

The manual is 2.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info