779575
11
Zoom out
Zoom in
Previous page
1/35
Next page
11
Insert a flat-head screw driver or similar object into the battery door latch and gently pry
upward to release the battery door from the base.
Insert the batteries inside the battery compartment as shown on the diagram.
Snap the battery compartment door back into place.
NOTE
If the low battery icon appears in the display, you need to replace the batteries. It is important that
you replace them as soon as possible to maintain unit operation when electrical power is o. As a
precaution, you may want to write down any stored information you do not want erased.
IMPORTANT
If you are not going to use the telephone for more than 30 days, remove the batteries because
they can leak and damage the unit.
3. Plug the power supply cord into the power jack on the back of the base and the other end into
an electrical outlet.
Caution: To reduce risk of personal injury, fire, or damage use only the base power
adaptor supplied. This power adaptor is intended to be correctly orientated in a vertical
or floor mount position.
4. Connect the telephone line cords:
If you are connecting to two 1-line phone jacks with two phone cords:
You can use the two included 1-line phone cords to connect the phone lines to the jacks in the
back of your phone.
If you are connecting to one 2-line phone jack with one phone cord:
If you have Line 1 and Line 2 wired into one wall jack in your home or oce, you can use one
of the supplied telephone line cords to connect from the wall jack to the Line 1+2 jack on the
back of the phone as shown below.
Line 1
Line 2
Line 1 + 2
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25260 in the language / languages: English as an attachment in your email.

The manual is 2.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info