779575

Motorola ML25260 Manual

10
Zoom out
Zoom in
Previous page
1/35
Next page
10
6 Connections and Setup
6.1 Important Installation Information
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line is disconnected
from the network.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any other equipment connected to the telephone.
6.2 Important Installation Guidelines
• Install telephone near both a telephone jack and an electrical power outlet.
• Avoid sources of noise, such as a window or a busy street, and electrical noise, such as motors,
microwave ovens and fluorescent lighting.
• Avoid heat sources, such as heating air ducts, heating appliances, radiators and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations
• Avoid other cordless telephones or personal computers.
CAUTION
Always disconnect all phone cords from the base unit before battery installation or replacement.
NOTE
Some cordless telephones operate at frequencies that may cause or receive interference with
nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the
cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away from these appliances.
Certain other communications devices may also use the 1.9 GHz frequency for communication, and,
if not properly set, these devices may interfere with each other and/or your new telephone. If you
are concerned with interference, please refer to the owner’s manual for these devices on how to
properly set channels to avoid interference. Typical devices that may use the 1.9 GHz frequency for
communication include wireless audio/video senders, wireless computer networks, multi-handset
cordless telephone systems, and some long-range cordless telephone systems.
6.3 Installing the Phone
The phone may be connected to one 2-line (RJ14C) or two 1-line (RJ11C) wall jacks to
accommodate both lines.
1. If operating the unit in Main/Wired mode, choose an area near an electrical outlet and a
telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a
desktop or tabletop, or you may mount it on the wall.
2. Install 5 AAA-size alkaline batteries (not included) for back up power in the event of a power
failure.
NOTE
Please use the included power adaptor for normal use; the Motorola ML25260 is designed to run
on the back up batteries for short periods only.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25260 in the language / languages: English as an attachment in your email.

The manual is 2.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info