779576

Motorola ML25254 Manual

24
Zoom out
Zoom in
Previous page
1/36
Next page
24
4. Press
SELECT
softkey to save your selection.
NOTE
If you set the ring volume to O, the screen will display
L1/L2 RINGER OFF
.
8.16 Speakerphone, Handset and Corded Headset Volume
During a call, press VOL + and VOL - of the navigation button to adjust the call volume until you
reach a comfortable listening level. The phone stores the setting after the last button pressed.
8.17 Hold
1. During a call, press HOLD to put the line on hold. The screen will display
LINE 1/LINE 2 ON HOLD
,
and the line icon will flash. The line button indicator will flash also.
2. When the line is on hold, the hold alert tone will be emitted to both the person on hold and to
the user that initiated the hold.
Press the corresponding LINE button to release the hold and return to the call again.
8.18 Conference Calls
This system can support 3-way and 4-way conference calls.
8.18.1 Joining a call in progress
While a call is in progress, another user can join that call by pressing the corresponding LINE
button on the base. Both parties on the original call will hear a tone to alert them someone else
has joined the call.
NOTE
If the Line Privacy feature is On for the original call, the call cannot be joined by another user.
8.18.2 3-way conference call by an intercom call
1. While on a call, press INTERCOM.
2. Using VOL + and VOL - of the navigation button to scroll to the desired handset and press
SELECT
softkey.
3. The selected handset will emit a page tone. The user on the selected handset can press t or s
to answer the intercom / paging call.
4. The originating caller can then press
CONF
softkey to establish a 3-way conference between
the external caller and the intercom call.
8.18.3 3-way conference call with two lines
1. While on a call on Line 1, press HOLD to put the call on hold.
2. Press LINE 2 to get a dial tone. Dial the phone number, and then talk to the other person.
3. The originating caller can then press
CONF
softkey to establish a 3-way conference between
the two lines.
8.18.4 4-way conference call (Line 1 + Line 2 + 2 extensions)
1. While on a call with both Line 1 and 2 on hold, press INTERCOM and select the desired handset
to intercom.
2. The selected handset will emit a page tone. The user on the selected handset can press t or s
to answer the intercom / paging call.
3. The originating caller can then press
CONF
softkey to establish a conference.
4. Since Line 1 and 2 are both on hold, the user will be prompted to select Line 1, Line 2 or Both
to conference with. If
BOTH
softkey is selected a 4-way conference is established between the
originating caller, both lines and the intercom call.
9 Intercom Calls
9.1 Making an Intercom Call
1. In idle mode, press any One-Touch Memory (1 -10) button for the extension you want to
intercom. One-Touch Memory (1) button represents handset 01, (2) represents handset 02, etc.
The intercom / page tone will be emitted.
Or, press INTERCOM to bring up the list of all registered handsets and base (except itself).
Then using VOL+ and VOL- of the navigation button to scroll to the desired handset and press
SELECT
softkey.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25254 in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info