779576

Motorola ML25254 Manual

15
Zoom out
Zoom in
Previous page
1/36
Next page
15
manually. The Year information is not in the CID record.
7.3.2 Auto ANS Intercom
When it is set to on, the base will auto answer the intercom call when it receives an intercom call.
From the
PHONE SETTINGS
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
AUTO ANS INTERCOM
. Press
SELECT
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
ON
or
OFF
.
3. Press
SELECT
softkey to save your selection.
NOTE
The default setting is
OFF
.
7.3.3 Tone/Pulse Dial
The Dial Mode of Line 1 and Line 2 can be set individually for each line.
From the
PHONE SETTINGS
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
TONE/PULSE DIAL
. Press
SELECT
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
LINE 1
or
LINE 2
and press
SELECT
softkey.
3. Using VOL + and VOL - of the navigation button to scroll to
TONE
or
PULSE
.
4. Press
SELECT
softkey to save your selection.
7.3.4 Area Code
The telephone uses the pre-programmed area code to determine the number format to display
when a valid Caller ID record is received. The pre-programmed area code is also used for the
Dialing Back feature.
From the
PHONE SETTINGS
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
AREA CODE
. Press
SELECT
softkey.
2. Using the dial pad to enter your 3-digit area code.
3. When you are finished, press
SAVE
softkey.
7.3.5 Registration
A cordless handset accessory will not operate until it is registered to the base.
During the registration process, keep the cordless handset near the base. Up to 10 cordless
handsets (in total) can be registered to one base.
Please refer to the User Guide of Motorola multi-line cordless handset accessory for instructions
on setup and use.
7.3.6 Remove Handset
De-registration cancels registration.
During the de-registration process, keep the handset near the base.
It is not recommended that a handset be deregistered unless absolutely necessary because once a
handset is deregistered, that handset’s telephone features cannot be used until the handset is
re-registered.
From the
PHONE SETTINGS
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
REMOVE HANDSET
. Press
SELECT
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to the cordless handset you wish to
remove and press
SELECT
softkey.
3. The screen will display
REMOVE HANDSET?
4. Press
YES
softkey to confirm de-registration. The cordless handset will display
PRESS “REG” TO
INITIATE REGISTRATION
once the handset is de-registered.
7.3.7 2nd Call Alert
When it is set to on, you will hear the alert tone when you are in conversation and there is an
incoming call from another line.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25254 in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info