779576
14
Zoom out
Zoom in
Previous page
1/36
Next page
14
6. Connect the handset cord:
Connect one end of the coiled handset cord to the jack on the side of the base and the other
end into the jack in the corded handset, and place the handset in the cradle.
6.4 Backup Battery Operation
If the power supply cord is not plugged into the base unit, and the battery is available, the unit
enters Battery Operation Mode. In this mode, the base is fully functional.
7 Programming the Phone
7.1 Standby Screen
The base displays the current date, time and the softkey labels.
The softkey labels will change according to the status of the unit.
The base display has a dedicated
SET CLOCK
icon flashing when the clock is not set. Go to
PHONE SETTINGS - DATE/TIME
to set the clock.
7.2 Programming Functions
The system uses a menu structure to give you access to all of the built-in features. You may
program the following items in main menu:
PHONE SETTINGS
DISPLAY SETTINGS
SOUND SETTINGS
ANSWERING SYS.
VOICE MAIL
RESTORE SETTINGS
NOTE
During programming, you may press
BACK
softkey at any time to exit the sub-menu and return to
the main menu, or press EXIT key to exit programming and return to standby screen.
If no key is pressed for 30 seconds, the base will automatically exit programming and return to
standby screen.
7.3 Phone Settings
1. In idle mode, press
MENU
softkey to go to the main menu.
2. Using VOL + and VOL - of the navigation button to scroll to
PHONE SETTINGS
.
3. Press
SELECT
softkey and you may program the following items:
DATE/TIME
AUTO ANS INTERCOM
TONE/PULSE DIAL
AREA CODE
REMOVE HANDSET
2ND CALL ALERT
UPDATE HS LIST
7.3.1 Date/Time
From the
PHONE SETTINGS
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
DATE/TIME
. Press
SELECT
softkey.
2. The base will display the last-set time (or, if the device is new or has been reset to default, the
base will display
12:00AM 01/01/11
)
3. Using the dial pad to enter digits for the current time and date.
4. Using DIR and CID of the navigation button to move the cursor and the
AM/PM
softkey to set
the time
AM
or
PM
.
5. When you are finished, press
SAVE
softkey.
NOTE
If you subscribe to Caller ID service, the current Date/Time is set automatically when you receive
your first CID record and will override manually set Date/Time. However, the Year must still be set
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25254 in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info