779579

Motorola ML1000 Manual

16
Zoom out
Zoom in
Previous page
1/35
Next page
16
4. This menu will allow you to control the ring tones on each line and the intercom. Using the
navigation button, move the indicator to the phone line you wish to change the tone for.
When selected, each line will play sample of the ringtone.
5. Using l and r of the navigation button, select the desired ring tone. Press
Select
softkey
when you are finished.
9.5 Tone/Pulse Dial (Motorola ML1000 only)
Telephone lines in some areas may still require pulse dialing.
1. Press
Menu
softkey while in idle mode.
2. Using the navigation button, move the indicator to
Line Settings
. Press
Select
softkey.
3. Move the indicator to
Tone/Pulse Dial
and press
Select
softkey.
4. Using the navigation button, move the indicator to the phone line whose dial mode you
wish to change.
5. Using l and r of the navigation button, choose either
Tone
or
Pulse
and press
Select
softkey.
NOTE
All lines are set to
Tone
by default.
9.6 Priority Line
The priority line has precedence over the other three lines and, if available, will be used
automatically when the handset is lifted or the speakerphone is used. If the priority line is in
use, the next available line will be selected.
1. Press
Menu
softkey while in idle mode.
2. Using the navigation button, move the indicator to
Line Settings
. Press
Select
softkey.
3. Move the indicator to
Priority Line
and press
Select
softkey.
4. Using the navigation button, move the indicator to the phone line you wish to set as the
priority line and press
Select
softkey.
9.7 Delay Ring
Use this setting to delay this phone’s ringer. Other phones on the system will still ring
immediately on incoming calls.
1. Press
Menu
softkey while in idle mode.
2. Using the navigation button, move the indicator to
Phone Settings
. Press
Select
softkey.
3. Move the indicator to
Delay Ring
and press
Select
softkey.
4. Using u and d of the navigation button, select how many rings this phone will remain silent
before ringing during an incoming call and press
Select
softkey.
9.8 Phone ID / Extension Name
Phone ID / Extension Name is what you name your phone and how it will appear on the
intercom lists of the other phones on the system.
1. Press
Menu
softkey while in idle mode.
2. Using the navigation button, move the indicator to
Phone Settings
. Press
Select
softkey.
3. Move the indicator to
Extension Name
and press
Select
softkey.
4. Using the alphanumeric dial pad, enter a phone name up to 11 characters. More than one
letter is stored in each of the number keys. For example, to enter “Lorraine,” press the
5 key three times for the letter L, press the 6 key three times for the letter O, press the
7 key three times for the letter R, and so on.
5. When finished, press
Save
softkey to save the name to your phone. If you make a mistake,
press
Clear
softkey to delete the previous character.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML1000 in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info