779579
14
Zoom out
Zoom in
Previous page
1/35
Next page
14
7.4 Connecting your System
Once the Motorola ML1000 phone is set up and has dial tone, it is ready to be wirelessly
connected to the other Motorola ML1100 phones and Motorola ML1200 handsets that will
make up your system. Once you have unboxed and plugged in your Motorola ML1100 phone or
Motorola ML1200 handset, they will be ready to register to the base.
7.4.1 To Register a Motorola ML1100 Wireless Deskphone to the System
1. On your Motorola ML1000 base, press
Menu
softkey.
2. Using the navigation button, move the indicator to
Add/Remove Phones
. Press
Select
softkey.
3. Select
Register Phone
option and press
Select
softkey. This will put the Motorola ML1000
base in registration mode as it searches for another phone to register.
4. On your Motorola ML1100 wireless deskphone, press
Reg
softkey. It will also enter
registration mode and search for the base.
5. If registration is successful, both phones will beep and display
Registration Complete!
If
registration is not successful, move the phones closer together and try again.
7.4.2 To Register a Motorola ML1200 Cordless Handset to the System
1. On your Motorola ML1000 base, press
Menu
softkey.
2. Using the navigation button, move the indicator to
Add/Remove Phones
. Press
Select
softkey.
3. Select
Register Phone
option and press
Select
softkey. This will put the Motorola ML1000
base in registration mode as it searches for another phone to register.
4. On your Motorola ML1200 cordless handset, press
Reg
softkey. It will also enter registration
mode and search for the base.
5. If registration is successful, both phones will beep and display
Registration Complete!
If
registration is not successful, move the phones closer together and try again.
NOTE
If your Motorola ML1100 or ML1200 does not display the
Press “REG” To Initiate Registration
message on the display when you plug it in, the
Register Phone
option is available in the
Add/Remove Phones
menu.
7.4.3 To Remove a Motorola ML1100 or ML1200 from the System
To remove a Motorola ML1100 or ML1200 from the system you must deregister it from the
Motorola ML1000 base phone.
1. On your Motorola ML1000 base, press
Menu
softkey.
2. Using the navigation button, move the indicator to
Add/Remove Phones
. Press
Select
softkey.
3. Move the indicator to
Deregister Phone
and press
Select
softkey.
4. Select from the list the extension you wish to remove and press
Select
softkey. Confirm by
pressing
Yes
softkey.
NOTE
Removing an extension from the system will leave it unable to make or receive calls until it is
re-registered to a Motorola ML1000 base.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML1000 in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info