458236
17
Zoom out
Zoom in
Previous page
1/26
Next page
Advanced settings 17
EN
8. Advanced settings
This setting is useful to access certain network and PABX/switchboard services.
Recall time
The default D1000 recall time is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
RECALL TIME
is displayed. Press m.
3.
Press u or d to select the setting you want:
SHORT
,
MEDIUM
,
LONG
.
4.
Press m to confirm.
5.
Press > to return to standby.
NOTE
The use of your D1000 cannot be guaranteed on all PABX.
Dial mode
The default D1000 dialling mode is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
DIAL MODE
. Press m.
3.
Press u or d to select
TONE
or
PULSE
.
4.
Press m to confirm.
5.
Press > to return to standby.
Temporarily switch from Pulse to Tone dialling
1.
Press and hold *.
The dial mode will change from Pulse to Tone for the duration of the call.
Call barring
Prevent certain numbers from being dialled from your D1000. Store up to four specific numbers,
each up to 4 digits – for example, international or local prefixes.
Bypass call barring by switching the setting Off or On.
NOTE
If you switch Call barring on,
BARR MODE ON
will be displayed on your screen in standby mode.
Switch call barring on/off
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
CALL BARRING
. Press m.
3.
Enter the master PIN (default setting 0000) and press m.
4.
MODE
is displayed. Press m.
5.
Press u or d to select
ON
or
OFF
. Press m to confirm.
6.
Press > to return to standby. You can now set the number
(See below).
Set a number to be barred
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
CALL BARRING
. Press m.
3.
Enter the master PIN (default setting 0000) and press m.
4.
Scroll d to
NUMBER
. Press m.
5.
If necessary, scroll u or d to the next available slot.
6.
Press m and enter the number or prefix you want to bar. Press m
to confirm.
7.
Press > to return to standby.
Easy call
When activated, this feature allows you to dial a number by pressing any key on your handset
(except >). This feature is very useful for access to emergency services.
Switch easy call on/off
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
EASY CALL
. Press m.
3.
Enter the master PIN (default setting 0000) and press m.
4.
MODE
is displayed. Press m then press u or d to select
ON
or
OFF
. Press m to confirm.
5.
Press > to return to standby.
NOTE
If you switch Easy call on,
EASY CALL ON
will be displayed on your screen in standby mode.
To switch Easy call off again:
1.
Press >.
2.
OFF?
is displayed. Press m to confirm.
Set the easy call number
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
EASY CALL
. Press m.
3.
Enter the master PIN (Default setting 0000) and press m.
4.
Scroll d to
NUMBER
. Press m.
5.
Enter the number. Press m to confirm
6.
Press > to return to standby.
Dial an easy number
When an easy call number has been stored and the easy call setting switched on, press any key
(apart from >), to dial a number.
NOTE
When easy call is switched on, you can still answer any incoming call as normal.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D1012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D1012 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola D1012

Motorola D1012 User Manual - German - 66 pages

Motorola D1012 User Manual - Dutch - 30 pages

Motorola D1012 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info