458236
15
Zoom out
Zoom in
Previous page
1/26
Next page
Clock & Alarm 15
EN
6. Clock & Alarm
If you subscribe to your network’s Caller Identification service, the time on your D1000 may be set
automatically each time you receive a call, depending on your network provider.
You can also set or adjust the time using the Clock & Alarm menu.
Set date and time
1.
Press m and scroll d to
CLOCK/ALARM
. Press m. Display shows
DATE & TIME
, then press
m.
2.
Enter the date using the format
DD/MM
e.g.
04/ 08
for 4th August.
3.
Press m and enter the time using the 24 hour format
HH:MM
,
e.g. 14:45 for 2:45pm.
4.
Press m to confirm.
5.
Press > to return to standby.
NOTE
The date and time is retained during a power failure or when the batteries are discharged.
Set alarm
1.
Press m, scroll d to
CLOCK/ALARM
and press m.
2.
Scroll d to
SET ALARM
and press m.
3.
Scroll u or d to
OFF
,
ON ONCE
or
ON DAILY
and press m.
4.
If you select
ON ONCE
or
ON DAILY
, enter the time using the 24 hour format
HH - MM
e.g 14:45 for
2:45pm and press m.
5.
Press > to return to standby. When the alarm goes off, press any key to stop the ring.
NOTE
Once the alarm is set to on, the icon is displayed.
The alarm will ring at the medium level.
ALARM ON
and the will flash on the display.
Set alarm melody
There are three alarm ringtones.
1.
Press m and scroll d to
CLOCK/ALARM
.
Press m.
2.
Scroll d to
ALARM TONE
and press m.
- Melodies are played.
3.
Scroll u or dand press m.
7. Personal settings
Handset tones
WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your
hearing.
Ring volume
Choose from: Ringer Off, Low, Medium, High, Boost and Progressive (increasing ring volume).
NOTE
The default setting is High.
1.
Press m, scroll d to
PERSONAL SET
and press m.
2.
HANDSET TONE
is displayed. Press m.
3.
RING VOLUME
is displayed. Press m.
4.
Scroll u or d to adjust the ringer volume level.
5.
Press m to save the settings.
6.
Press > to return to standby.
Ring melody
Choose from 10 ringer melodies.
1.
Press m, scroll d to
PERSONAL SET
and press m.
2.
HANDSET TONE
is displayed. Press m and scroll d to
RING MELODY
. Press m.
3.
Press u or d to select the ringtone.
- A sample of the ringtone is played.
4.
Press m to confirm.
5.
Press > to return to standby.
Group melody
To benefit from this feature, you must subscribe to the Caller Line ldentification service.This menu
enables you to select and set the melodies to be played when there is an external incoming call
from a contact whose name is stored in your phonebook and is part of a group. You can associate
1 ring melody to each group. There are three phonebook groups (Group A, B, C) available for you
to organize your contacts. Each group can be assigned a unique melody.
1.
Press m, scroll d to
PERSONAL SET
and press m.
2.
HANDSET TONE
is displayed. Press m and scroll d to
GROUP MELODY
. Press m.
3.
Scroll u or d to select:
GROUP A
,
B
or
C
, then press m.
4.
Press u or d to select the ringtone you want for the group and press m.
5.
Press > to return to standby.
Key tones on/off
When you press a key on the handset you hear a beep. You can switch these beeps on or off.
1.
Press m, scroll d to
PERSONAL SET
and press m.
2.
HANDSET TONE
is displayed. Press m and scroll d to
KEY TONE
. Press m.
3.
Scroll u or d to select
ON
or
OFF
.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D1012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D1012 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola D1012

Motorola D1012 User Manual - German - 66 pages

Motorola D1012 User Manual - Dutch - 30 pages

Motorola D1012 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info