458231
18
Zoom out
Zoom in
Previous page
1/26
Next page
18 Advanced settings
Registration
Up to 5 handsets can be registered to one base station. Additional handsets must be registered
to the base before you can use them.
• The instructions described below apply specifically to your D1000 handset. If you wish to
register another manufacturer’s handset, the instructions may vary. In this case, please refer to
the manufacturer of the additional handset.
• The Master PIN is required before you can register or unregister handsets. The default PIN is
0000
.
Register a handset
At the base:
1.
Press and hold the p button on the base station for at least 3 seconds. The base station
emits a beep when it is ready to accept registration. You have 90 seconds in which to register
a handset.
At the handset:
1.
Press m and scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
REGISTRATION
and press m.
3.
If necessary, scroll u or d to display
REGIST. BASE
and press m.
BASE 1 2 3 4
is displayed and
the registered base number is flashing. Enter the number of the base on which you wish to
register your handset.
If you have only 1 base station, press 1. If you have 2 base stations, press 1 or 2, etc.
4.
When the display shows
PIN
----, enter the base PIN.
- When the handset registers with the base, it is assigned a handset number.
Select a base
You can register your D1000 handset with up to 4 bases. Once registered, you can switch
between bases, for example, bases at home and at work.
1.
Press m and scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
REGISTRATION
and press m.
3.
SELECT BASE
is displayed. Press m.
- The available bases are displayed with the current base number flashing.
4.
Enter the number of the base you want – 1,2,3 or 4 and press m.
- When the base is found you hear a beep. If not found, the display shows
UNREGISTERED
.
Unregister a handset
1.
Press m and scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
UNREGISTER
and press m.
3.
Enter the 4 digit master PIN and press m.
- Display shows the registered handset numbers.
4.
Scroll u or d to select the handset you want to delete and press m.
-
UNREGISTERED
is displayed on the handset screen.
PIN
The 4-digit master PIN is used when registering or unregistering a handset and when changing
some settings on your D1000. The default setting is 0000. You can change this PIN for more
security.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
PIN
. Press m.
3.
Enter the current 4 digit master PIN and press m. (Default setting 0000).
4.
Enter the new PIN and press m.
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
Reset
This will reset your D1000 to its default settings.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
RESET UNIT
. Press m.
3.
CONFIRM?
is displayed. Press m.
NOTE
Entries stored in the phonebook are retained. After reset, depending on your country, the welcome
mode setting may be shown on the handset display.
Default settings
Handset name Handset
Key tone On
First ring On
Auto pick up On
Auto hang up On
Ringer melody Melody 1
Ringer volume High
Earpiece volume 3
Phonebook Unchanged
Call log Empty
Redial list Empty
Master PIN 0000
Keypad lock Off
Clock 00:00
Alarm Off
Dial mode Tone
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D1001 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola D1001

Motorola D1001 User Manual - German - 56 pages

Motorola D1001 User Manual - Dutch - 26 pages

Motorola D1001 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info