466735

Motorola D 810 series Manual

16
Zoom out
Zoom in
Previous page
1/133
Next page
16 Answering machine
11. Answering machine
Your D811 can digitally record up to 12 minutes of messages
or up to 59 messages. Each message can last up to a
maximum of 3 minutes. As well as recording incoming
messages, you can record memos for other users.
You can operate your answering machine from:
• the base.
• the handset.
• remotely, from any other Touchtone™ telephone, see
page 17.
You will need to set the date and time (if you have not already
done so) so that you will know when each message was
received, see page 13. The default day and time setting is
Monday 12.01 pm.
Base control keys
For more information on outgoing messages (OGM), see
page 16.
Switch the answering machine on / off
1.
Press
Menu
, scroll to
Answer Machine
and press
Select
.
2.
Scroll to
Answer On/Off
and press
Select
.
3.
Scroll or to highlight
On
or
Off
and press
Select
. When
switched on, the handset display shows in idle.
This can also be done via the base by pressing on the base.
Answer delay
Answer delay sets the number of times your D811 will ring
before the answer machine picks up your call and starts playing
the outgoing message.
You can change this setting to between 2–9 rings or
Time Saver
.
The default setting is 6 rings.
1.
Press
Menu
, scroll to
Answer Machine
and press
Select
.
2.
Scroll to
Answer Settings
and press
Select
.
3.
Scroll or to
Answer Delay
and press
Select
.
4.
Scroll or to the setting you want and press
Select
.
5.
Press
Back
to return to the previous menu level.
For more information on Time Saver, see “Switch your
answering machine on remotely” on page 18.
Switch message alert tone on / off
When you have new messages, with the audible message alert
switched on, you will hear an audible alert once at the handset and
the TAM base will beep every 10 seconds. The default setting is
Off.
1.
Press
Menu
, scroll to
Answer Machine
and press
Select
.
2.
Scroll to
Answer Settings
and press
Select
.
3.
Scroll or to
Message Alert
and press
Select.
4.
Scroll or to highlight
On
or
Off
and press Select.
5.
Press
Back
to return to previous menu or key to return to
standby.
On-screen alert
When you have new answering machine messages, the
icon is displayed along with
You have X new messages
. All new
messages are indicated by a green dot.
1.
Press
Play
. Or, scroll or the list of messages. Press
Play
to hear the highlighted message.
Outgoing messages
The outgoing message is the message a caller first hears when
the answering machine picks up their call. There are 2
prerecorded outgoing messages to choose from or you can
record your own.
Record your own outgoing message
Your D811 comes with two prerecorded outgoing messages,
Answer and Record or Answer Only, but if you wish you can
record your own.
ANSWER AND RECORD
The pre-set Answer and Record outgoing message, that allows
your caller to leave a message, is “Hello, your call cannot be
taken at the moment, so please leave your message after the
tone”.
Your Answer and Record outgoing message can be up to 3
minutes long and will replace the prerecorded message.
ANSWER ONLY
The pre-set Answer Only outgoing message, where callers hear
an announcement but cannot leave a message, is “Hello, your
call cannot be taken at the moment and you cannot leave a
message, so please call later”.
When recording your Answer Only message, remember to
advise your caller that they will not be able to leave a message.
Your Answer Only message can be up to 12 minutes long
(maximum recording length) and will replace the pre-recorded
message.
However, you should try to keep your message short to allow
time for recording memos, or incoming messages when using
Answer and Record mode.
To record your outgoing message:
1.
Press
Menu
, scroll to
Answer Machine
and press
Select
.
2.
Scroll to
Outgoing
Message
and press
Select
.
3.
Record
is highlighted, press
Select
.
4.
Scroll or to
Answer & Record
or
Answer Only
and press
Select
.
5.
The display shows
Please speak after the tone
.
6.
After the tone, speak your message clearly into the handset
then press
Save
or to end recording.
7.
Your outgoing message is played back. If you want to
delete it, press
Delete
during playback. If you press
Save
or
wait for the message to play back, it will be saved.
Outgoing message language
Change the language of your pre-set outgoing messages.
1.
Press
Menu
, display shows
Answer Machine
and press
Select
.
2.
Scroll to
Answer Settings
and press
Select
.
3.
Language
is displayed, press
Select
.
Press to turn the answering machine on/off
Press and hold to enter the outgoing message (OGM)
selection mode
Press to play all stored messages
Press to pause or resume playback
Press to stop message playback
Skip to the next message during message playback
Select Answer Only OGM during OGM selection mode.
Replay current message
Press twice to skip back to previous message
Select Answer & Record OGM during OGM selection
mode.
Delete current message during message playback
Press to delete personal OGM during OGM playback.
The pre-recorded OGM is selected and played.
Increase speaker volume during message playback
Decrease speaker volume
D811_IFU_EN.fm Page 16 Friday, September 7, 2007 7:37 PM
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D 810 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D 810 series in the language / languages: English, German, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info