744523

Morso S50-40 Manual

31
Zoom out
Zoom in
Previous page
1/36
Next page
31
DK ENG
Please note that no unauthorised alterations of the design may be undertaken, and that any
parts that are replaced must be replaced with original Morsø parts.
Gaskets
The gaskets in the doors will wear out over time and should be replaced as required in order to
prevent runaway combustion. Use the original Morsø gasket kit.
Note: Normal wearing parts are not covered by Morsø’s extended warranty.
A selection of maintenance products (spare parts, glass cleaner, paint, gasket kit, etc.) is avail-
able from your Morsø dealer.
3.3 Cleaning the stove
A layer of ash and soot will form as a result of the draught in the chimney and after sweeping,
particularly on the top of the upper baffle.
During normal cleaning, the baffles can be removed from the stove. Once the baffles have been
taken out, you can access the flue chamber above the baffles and clean it.
Clean the baffles before reassembling them, and make sure that they are correctly assembled.
Nowadays, the chimney sweep must remove the soot in the stove, in addition to sweeping the
chimney and cleaning the flue pipe. The number of annual sweepings/cleanings of the stove
should be determined in consultation with your chimney sweep.
Ash
As noted above, there should be a layer of approx. 1 cm insulating ash in the bottom of the
combustion chamber in order to achieve a high combustion temperature. If the layer of ash is
too thick, it can be brushed down into the ash pan.
Empty the ash pan before it gets completely full so that the ash does not insulate around the
grate, and thereby speed up the burn-through.
In most cases, the ash will need to be taken away by the waste disposal company. Because em-
bers may be concealed in the ash pan for several days, it may be necessary to store the ash in a
container made of non-flammable material before pouring it into a rubbish bag.
Ash from a wood-burning stove will not be of any benefit to your garden as fertiliser. If you have
burned colour brochures, or painted or treated wood, etc., in the stove, the resulting ash must
not be poured onto soil as it may contain heavy metals.
Removing/installing vermiculite parts (brick panel, rear
brick and baffle plates)
Vermiculite should only be removed/installed when the sto-
ve is cold
1. Start by removing ash from the cold stove.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso S50-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso S50-40 in the language / languages: English, Danish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info