Manual Morso S50-40 (page 30 of 36) (English, Danish)

744523

Zoom out

Zoom in

1/36

DK ENG

3.1 External maintenance

The cast surface of the stove is painted with heat-resistant Senotherm paint. It is best

maintained by simply vacuuming it with a soft brush attachment or wiping it down with a dry,

dust-free cloth.

If the stove is used too vigorously, the painted surface may assume a greyish tinge over time,

but the stove can easily be freshened up with Morsø spray paint, which is available from your

local retailer.

Morsø stoves are painted in Morsø charcoal or Morsø light grey. The paint is available either as

a spray or in tins.

3.2 Internal maintenance

Glass window

If the stove is used correctly, very little or no soot will be deposited on the ceramic glass win-

dow. If soot does form on the glass as the stove is being lit, it will burn away once normal com-

bustion begins in the stove. If the glass window becomes thoroughly covered in soot due to in-

correct operation, the soot can be easily removed using Morsø Glass Cleaner. The glass must

be cold when you clean it. Avoid stoking the stove with pieces of wood that are so long that they

press against the glass window when the door is closed.

Only use Morsø Glass Cleaner.

Ceramic glass replacement

Ceramic glass cannot be recycled because it has a higher melting point that ordinary glass.

If ceramic glass is mixed with ordinary glass, the raw material is spoiled, and the reclaiming

process may be halted. Take care that the ovenproof glass does not end up among ordinary re-

cycled waste. That will be a great beneﬁt to the environment.

Note: Should be handed in to a recycling station as ceramic glass.

Internal cast-iron grate and/or wearing parts

The bafﬂes and other components that come in direct contact with the ﬁre and glowing fuel are

all wearing parts. As a result, they will be particularly susceptible to burn-through. When used

correctly, these parts will last for many years, but overly vigorous use will naturally accelerate

the burn-through. Such parts are all easily replaced. If the bafﬂes are damaged and are not re-

placed in time, the top plate will be exposed to such high temperatures that it may be damaged

as well.

3.0 Routine stove maintenance

Reasons for overly rapid wear of internal parts

- Stove ﬁred too vigorously

- Use of very dry wood (wood from old furniture).

- Too much soot on top of the bafﬂes (please see the section on Cleaning).

- Too much ash in the ash pan (please see the section on Ash).

Reasons for sooty glass window:

- The fuel is too wet.

- The pieces of fuel are to big/uncut wood.

- The combustion temperature is too low.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morso S50-40 in the language / languages: English, Danish as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morso S50-40 Manual

Product: