1412: Afterremovingtheouterpackaging,flattenitandlayontothefloorclosetothestove;After removing the outer packaging, flatten it and lay onto the floor close to the stove;
this can then act as protective work surface during the assembly process.
Next, remove the legs from inside the stove. Ca-
refully lift the stove from the wooden pallet and
gently lay the stove onto its back and unscrew the
heat shield from the underside of the stove. Now
screw the legs and the Heat shield into position on
the underside of the base. Following the removal
of the wooden packaging the heat shield must be
fitted to the underside of the stove at the same time
as the legs utilising the same fixing bolts. Please
see drawing.
The stove should now be lifted and moved into
the upright position, avoiding excess load on the
back legs.
1442: Carefully lift the stove from the wooden pallet and set it carefully in place.
1452: The assembly of the soapstone stove 1450 is described separately and instructions are
enclosed with the soapstone packaging.
We recommend that two people perform the assembly and installation procedure. The Morsø
1412 weighs 70 kg, while the Morsø 1442 weighs 80 kg and the 1452 weighs 120 kg.
1.2 Installing the stove
The stove and chimney installations MUST comply to all current National and Local Building Reg-
ulations; your approved Morsø dealer or your local building control officer can advise regarding
this. Ultimately, it is you and your installer who is responsible that the installation complies.
1.3 Chimney sweep
It may also be wise to consult your local chimney sweep before installing the stove. After your
stove has been installed, it is advisable to have the chimney checked and swept at least once
a year. In any case, if your chimney has not been used for some time, it should be inspected
for cracking, bird nests, etc. before it is put back into use.
1.4 Stove placement/clearance requirements
Minimum Clearance requirements apply if the stove is placed near to combustible materials.
Permitted clearances to combustible materials are also indicated on the data plate on the rear
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Morso 1452 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Morso 1452 in the language / languages: English as an attachment in your email.
The manual is 1,24 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
