66
HHeellpplliinneess:: 00884455 007777 77770000 ((UUKK)) 11880000 440099 111199 ((RReeppuubblliicc ooff IIrreellaanndd))
Steam off
‘MAX’ steam
DD
EE
FF
Variable steam
Fill the iron with water as
described in ‘Filling’, page
4, and insert the plug into
the electrical socket.
The steam output can be varied
from low to high by turning the
variable steam control
DD
. When
using the iron at the bottom of
the steam range, the steam
output should be adjusted to the
low setting.
The steam facility should only be
used on garments which are
suitable for ironing at 2, 3-dot
and MAX setting.
Shot of steam
EE
Press the shot of steam
button
¤¤
to obtain a burst
of extra steam for ironing
out creases in heavy
material such as denim etc.
The shot of steam can be used
whilst dry ironing, providing
there is water in the tank, and
the temperature control is set
within the steam range.
Do not use shot of steam at
temperatures below the steam
range shown on the control dial.
Note: For optimum steam
quality, do not operate the shot
more than three times in
succession.
Vertical steam
Hold the iron in a vertical
position between 1cm and 2cm
away from the item
FF
. Press the
shot of steam button
¤¤
, this will
create vertical steam. This
feature is especially useful for
removing creases from hanging
clothes, curtains, wall hangings,
etc.
Note; For optimum steam
quality, do not operate the shot
more than three times in
succession.
No drip system
Your iron is fitted with a no drip
system which is designed to
prevent water escaping from the
soleplate when the iron is too
cold.
During use, the no drip system
may emit a loud click,
particularly during heat-up or
whilst cooling down. This is
perfectly normal and indicates
that the system is functioning
correctly.
Auto shut-off
Your iron is fitted with the auto
shut-off function, it will
automatically shut down after a
set period. The ‘safety switch off’
L.E.D. will flash on the function
panel.
If the iron is left unattended in
the horizontal position, it will
shut down after 1 minute.
If it is left in the vertical position,
it will shut down after 8 minutes.
To reactivate the iron, gently
shake it and wait for the iron to
heat-up as normal.
Life long anti-scale
system
The life long anti-scale system
reduces scale deposits and
helps prolong the life of the iron.
MAINTENANCE
Self cleaning
GG
Your iron has a built in cleaning
system designed to keep the
water valve, steam chamber and
steam vents clear of lint and
loose mineral deposits.
1 Half fill the iron with water.
2 Place the iron on it’s heel.
3 Connect to a mains supply
outlet.
4 Set the temperature control to
‘MAX’. See ‘Temperature control’
on page 5.
5 The indicator light will flash until
the required temperature is
reached.
