793845

Morphy Richards 300302 - Crystal Clear Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
4
9
2
Using the iron
3
1) Filling the tank
Before first use, remove all packaging, including the protective cover on the soleplate. Make sure the iron is
not plugged in. Set the variable steam switch (1) to
‘ ’
. Fill the water tank (10) via the filling hole (6). To fill
the tank with the maximum amount of water, we recommend the iron is tilted vertically whilst being filled.
Do not overfill the iron otherwise it will cause leaking from around the filler cap and may run down
the iron.
IN HARD WATER AREAS, WE RECOMMEND USING DEIONISED, DISTILLED OR DEMINERALISED
WATER.
Never use battery topping up fluid or water containing any substances like starch, sugar, fragrant
additives or defrosted water from a refrigerator.
NOTE: Please see point 2 of ‘Exclusions’ on page 8.
Plug in the iron and switch on at the mains.
Set the temperature dial (12) to the temperature
required (see ‘Temperature Guide’ on page 3).
The temperature and auto shut-off indicator light
(9) will illuminate until the required temperature is
reached, then it will turn off.
Tip: We recommend the temperature and auto
shut-off indicator light is allowed to illuminate
and extinguish twice before you begin ironing.
The temperature and auto shut-off indicator light
will switch on and off whilst you are ironing.
Tip: Begin with cool fabrics and work up to
higher settings. An iron heats up quicker than it
cools down so this will save you time and energy.
Vary the steam output
using the variable
steam switch (1).
Only use the steam
function on heavy
fabrics and when the
temperature dial is set
within the shaded area
(as shown, right).
For stubborn creases, use the water spray
button (2).
If using for the first time, you may need to
press this a few times to pull the water
through.
Press the steam boost trigger
(3)
for extra steam
boost for stubborn creases / heavy fabrics.
NOTE: If you need to use the steam boost whilst
dry ironing, check the temperature dial
(12)
is set
within the steam range.
NOTE: For optimum steam quality, do not operate
the boost more than three times in succession
.
2) Temperature Selection 3) Selecting the steam level
4) Using the water spray 5) Steam boost
RN300302MUK Rev1.qxp_Instruction Booklet 02/01/2020 12:16 Page 4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morphy Richards 300302 - Crystal Clear at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morphy Richards 300302 - Crystal Clear in the language / languages: English as an attachment in your email.

The manual is 1.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info