646347

Morco F-11 EL Manual

10
Zoom out
Zoom in
Previous page
1/23
Next page
F0
Failed to measure hot
water temperature.
N
ot LOCKED OUT
F1
1st ignition failure.
The burner is not
ignited.
LOCK OUT
Activation of the
combustion product
discharge control
device (air pressure
switch). LOCK OUT
Failure during
operation.The burner
switchs off. Try to
reignite the
appliance.
LOCK OUT
TTB jumper
connector is missing
When ON/OFF button is pressed green
LED does not light
Green LED is lighting but heater does
not work
F2
F3
F4
Check heater is plugged pro-
perly to the mains. Blown fuse in
the power circuit.Blown fuse in
the plug.
Check wiring connections bet-
ween power circuit and electro-
nic circuit.Defective electronic
circuit.
10
USER
6.- TROUBLESHOOTING & FAULT CODES
Code Description Cause Solution
Fault in the NTC sensor or
defect in wiring.
Call to technical service.
Check the NTC and the wiring
Gas tap closed. Open the gas tap.
Gas bottle empty. Replace the gas bottle.
Air in the gas circuit.
R
epeat the ignition operation until
a
ppliance ignites.
Wiring in disrepair or improperly
connected.
Repeat the ignition operation.
Check the wiring, the electronic cir-
cuit, the servo valve and electrodes.
If the fault persists call to the technical
sevice and replace the defective
component.
Check pressure switch and wiring.
Review the exhaust fumes outlet.
If the fault persists, contact technical
service.
Repeat the ignition operation.
Check the wiring, the electronic
circuit, the servo valve and
electrodes.
If the fault persists call to the technical
sevice and replace the defective
component.
Connect the jumper.
Check the wiring and connections.
Connect the heater.
Replace the blown fuse.
If the fault persists, contact technical
service.
Connect the wirings properly.
Replace electronic circuit.If the fault
persists, contact technical service.
Electronic circuit fault.
Servo Valve fault.
Ionization electrode fault.
Exhaust fumes outlet blocked.
Gas bottle empty.
Wiring in disrepair or improperly
connected.
Electronic circuit fault.
Servo Valve fault.
Ionization electrode fault.
Lack of the jumper.Wiring in dis-
repair or improperly connected.
Combustion product discharge
control device (air pressure
switch) or defective wiring.
spark fault
1-10.010.649-ingles:1-10.005.856-ingles 24/03/14 17:41 Página 10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morco F-11 EL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morco F-11 EL in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info