14
• To remove the seal, gently pinch the exposed
gasket from the edge of the front door
between your thumb and forenger and pull
sideways away from the door.
• To install the seal, it’s easiest to remove the
front door rst. Place the gasket along the
hinge side with the at side down. Gently
stretch each corner into place. Press and tuck
the gasket rmly into place along all 4 sides
and chase it with your ngernail if needed to
ensure there are no gaps. It helps to chase
each corner towards the center of each long
side. Finish by closing the case and checking
the t.
• Don’t use any industrial cleaners to clean
OutRide. Fresh water should be enough for
almost any scenario.
CYCLE MOUNT INSTRUCTIONS
Mounting to Handlebar
Great for giving your viewers an idea of what
you’re seeing.
1. Mount your OutRide to the top of the DogBone
using the adjustment post knob that came with
OutRide. Use the hex wrench provided with
OutRide to tighten if needed.