674785

Moneual RYDIS Hybrid H68 Pro Manual

55
Zoom out
Zoom in
Previous page
1/64
Next page
53
Customer Support
Problem Solution
If the RYDIS H68 Pro is not driving
properly .
t 
Check if the mop pad is installed properly.
t 
Clean the sensors with a soft cloth. For more information, check on page 43.
If the RYDIS H68 Pro is slipping during
Hybrid Cleaning or Mop Cleaning.
t 
Make sure the Big Mop is attached properly.
t 
Damp the Big Mop with less water.
t 
Clean the two main wheels.
t 
Clean the Big Mop before cleaning.
t 
Try cleaning with water only.
t 
Try the Big Mop as dry.
t 
Try other oor.
If the Reservation (Scheduled) cleaning
does not work.
t
Make sure you are pressing the SELECT button to conrm the time setting
on the remote control.
t 
You can check if the Reservation lamp is properly activated on the control panel.
If the RYDIS H68 Pro does not respond
when you press a button.
t
For your safety, if you are directly connected to the power cord without the
charging station, the buttons will not be recognized. After disconnecting
from the power cord, the buttons will be recognized.
If the cleaning time has been
shortened.
t
Conrm that the red light on the charging station is lit up.
t
Conrm that the RYDIS H68 Pro is fully charged by checking the battery
status lamp on the display. Three solid bars indicate that the battery is fully
charged.
t
Contact Moneual support to replace or repair the battery if it does not solve
the issue above.
I cannot select the Turbo Option
(suction power).
The Turbo Option is supported by the Hybrid Cleaning, Vacuum Cleaning,
Intensive Cleaning, and Shadow Cleaning.
The Turbo Option is not supported while in the Mop Cleaning mode.
If the RYDIS H68 Pro cannot climb over
a threshold higher than 0.4inch (1cm).
tFor safety reasons, the RYDIS H68 Pro was designed not to climb over a
threshold higher than 0.4 inch (1cm).
tFor less than a 0.4inch threshold height, the user is able to choose threshold
climbing over on/o option by the remote control. We recommend not to
climb over while in Mop Cleaning mode and Hybrid Cleaning mode due
to the Big Mop with the H2O Tank. We also recommend that you select the
Threshold Option (climb over) ON while in Vacuum Cleaning mode. Factory
default is set to not climb over for Hybrid, Vacuum and Mop Cleaning mode.
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moneual RYDIS Hybrid H68 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moneual RYDIS Hybrid H68 Pro in the language / languages: English as an attachment in your email.

The manual is 7,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info