674785

Moneual RYDIS Hybrid H68 Pro Manual

54
Zoom out
Zoom in
Previous page
1/64
Next page
52
RYDIS H68 Pro
Troubleshooting
Problem Solution
If the RYDIS H68 Pro does not work or
if the power is not turning on.
tTurn on the system power switch at the lower-rear side of the RYDIS H68 Pro.
tCheck the battery level lamp on the control panel.
tCharge the battery if the battery level is low.
If the RYDIS H68 Pro does not charge.
t 
Clean the charging terminals on the bottom of the RYDIS H68 Pro and the
charging station.
t
Check if the charging lamp is lit up blue for power on and red for charging.
If not, then check if the power cord is connected to the charging station.
t
Turn on the system power switch at the rear of the RYDIS H68 Pro.
t
You can also charge the RYDIS H68 Pro by connecting the power adaptor
directly to the power jack at the rear side of the robot vacuum cleaner.
If the RYDIS H68 Pro does not return
to the charging station.
t 
Check the power connection and make sure blue lamp is on.
t 
Make sure the charging station is installed to the wall solidly.
t
Make sure the location of the charging station is an open area.
See page 16 for Installing the Charging Station.
t 
Clear all obstacles around the charging station.
t 
Install the charging station on hard oor when mop is attached.
If the remote control does not work.
tTurn on the system power switch at the rear side of the RYDIS H68 Pro.
t 
Replace the batteries on the remote control.
If the suction power is weaker than
normal.
t
Empty the dust bin.
t
Clean the lter of the dust bin.
t
Check if there is anything blocking the dust inlet.
t
Check if the Turbo option is on. If the Turbo option is on, it will provide more
suction power.
If the main brush does not rotate.
t 
Check if there is anything tangled in the main brush.
t 
Make sure the main brush has been installed properly.
If the side brushes do not rotate.
t 
Check if there is anything tangled in the side brushes.
t 
Make sure the side brushes have been installed properly.
If the operational noise is louder than
normal.
t 
Check if there is anything tangled in the main brush.
t 
Make sure the main brush has been installed properly.
t 
If the Turbo option is on, that can generate more noise.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moneual RYDIS Hybrid H68 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moneual RYDIS Hybrid H68 Pro in the language / languages: English as an attachment in your email.

The manual is 7,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info