674802

Moneual MI-120 Manual

7
Zoom out
Zoom in
Previous page
1/29
Next page
6
- corded mode: the iron can be used with the power unit.
Note: If you wish to apply numerous shots of the steam, use the iron in the corded mode.
DRY IRONING
Connect the iron to a suitable mains supply outlet.
Ensure that the steam control knob is in position “ ”.
Select the setting on the temperature regulator.
When the indicator light goes off, the required temperature is reached. The iron is ready for use.
To turn off the iron, turn the temperature regulator counter-clockwise to position “MIN”, set the iron
upright, and pull out the power plug.
STEAM IRON
Fill the water tank as described before initial usage.
Steam ironing can be used in the temperature ranges ●, ●●, ●●● MAX. For the reliable functioning of the steam
ironing, the water tank must be at least ¼ filled.
Spraying function: Press the spray button to moisten a spot to be ironed. Water will came out of the spray nozzle.
Steam Function: Turn the steam control knob to the required position, steam starts coming out from the holes
in the soleplate.
Burst of steam: Turn the temperature regulator to the position “MAX”. The indicator light will go off when the
required temperature is reached, then press the burst of steam button. This function provides an extra amount
of steam to remove stubborn wrinkles.
The iron surface must always be kept in an upright position.
To turn off, turn the temperature regulator counter-clockwise to “MIN” and pull out the power plug.
Turn the appliance upside down and carefully pour the remaining water out of the water tank. Carefully shake
the appliance.
Press the spray button to allow possible remaining water to come out more easily.
Anti-drip: This iron is equipped with a drip stop function: the iron automatically stops steaming when the
temperature is too low to prevent water from dripping out of the soleplate.
DESCALING
The appliance cannot be descaled using vinegar or any other liquid descaling agent. The steam iron has a self-
clean function:
Self-clean function
You can use the self-clean function to remove scale and impurities.
Use the self-clean function once every two weeks if the water in your area is very hard. The self-clean function
should be used more frequently.
Set the 3-position switch to position (for corded iron). Make sure the appliance is unplugged.
Take the iron from the stand.
Set the steam control knob to position “ ”.
Fill the water tank to maximum level.
Select the maximum ironing temperature.
Put the plug in the wall socket.
Unplug the iron when the temperature indicator light goes off.
Hold the iron over the sink, press and hold the self-clean button and gently shake the iron to and fro. (Steam
and boiling water will come out of the soleplate. Impurities and flakes (if any) will be flushed out).
Release the self-clean button as soon as all water in the tank has been used up.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moneual MI-120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moneual MI-120 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info