632603
8
Zoom out
Zoom in
Previous page
1/23
Next page
All operating elements and connections described
can be found on page 2.
1 Operating Elements and Connections
1 On / off switch of the phantom power (+48 V) for the
XLR jacks (5) of channels CH 1 and CH 2
also see warning notes in chapter 4
2 POWER switch of the mixer
3 Power supply jack for connection of the power sup-
ply unit provided
4 USB jack (type B) for connection to a computer: it
can be used both as an audio output (output of the
sum signal) and as an audio input (feed-in of audio
data for reproduction via channel CH 5 / 6)
5 Mono input (combined jack XLR, bal. / 6.3 mm jack,
unbal.) for channel CH 1 and channel CH 2, for
connection of a microphone via an XLR plug or an
audio source with line signal level via a 6.3 mm plug
6 Impedance switch, for channel CH 1 and channel
CH 2: press the button when an electric guitar or an
electric bass with passive audio pick-up has been
connected to the 6.3 mm jack (5)
7 Stereo input (6.3 mm jack, bal.) for channel CH 3 / 4
for connection of an audio source with line signal
level; when connecting a mono source, use jack L
only.
8 Stereo input (RCA) for channel CH 5 / 6 for connec-
tion of an audio source with line signal level
9 Stereo input (RCA) for connection to the output of
a recorder
10 Stereo output (RCA) for connection to the input of
a recorder
11 Stereo output (6.3 mm jack, unbal.) for connection
of an amplifier or another unit, e. g. a second mixer
12 Output (6.3 mm jack) for connection of stereo
headphones (minimum impedance 8 Ω) for moni-
toring the sum signal [independent of the master
control (29)] or the signal at the input TAPE IN (9)
13 Button to switch the input signal of the USB jack (4)
to channel CH 5 / 6
14 Button to switch the signal of the input TAPE IN (9)
to the sum signal
15 Button to switch the signal of the input TAPE IN (9)
to the headphone output (12)
16 Control to adjust the input amplification, for channel
CH 1 and channel CH 2
17 Equalizer to adjust the high frequencies (HI) and
low frequencies (LO), for each input channel
18 Effect control, for each input channel, to adjust the
effect component for each channel
19 Panorama control, for channel CH 1 and channel
CH 2, to place the mono signal in the stereo sound
20 Balance control, for channel CH 3 / 4 and channel
CH 5 / 6
21 Level peak indication, for channel CH 1 and chan-
nel CH 2
22 Level control, for each input channel
23 Effect level control to add the effect signal to the
sum signal
24 Volume control for the headphone output (12)
25 Rotary switch to select the effect
26 Control indication for the phantom power
also see item (1)
27 POWER ON indication
28 Stereo level indication for the sum signal adjusted
with the master control (29); in case of overload the
CLIP LEDs light up
29 Overall level control (master control): defines the
level of the sum signal sent via the outputs MAIN
OUT (11), TAPE OUT (10) and the USB jack (4)
2 Safety Notes
The units (mixer and plug-in power supply unit) corre-
spond to all relevant directives of the EU and are there-
fore marked with .
It is essential to observe the following items:
G
The units are suitable for indoor use only. Protect
them against dripping water and splash water, high
air humidity, and heat (admissible ambient tempera-
ture range 0 40 °C).
G
Do not place any vessels filled with liquid, e. g. drink-
ing glasses, on the units.
G
The heat being generated in the mixer must be car-
ried off by air circulation. Therefore, the air vents at
the housing must not be covered.
G
Do not set the mixer into operation, and immediately
disconnect the power supply unit from the mains
socket if
1. there is visible damage to the mixer or the power
supply unit,
2. a defect might have occurred after a drop or simi-
lar accident,
3. malfunctions occur.
The units must in any case be repaired by skilled
personnel.
G
For cleaning only use a dry, soft cloth, never use
chemicals or water.
G
No guarantee claims for the units and no liability for
any resulting personal damage or material damage
will be accepted if the units are used for other pur-
poses than originally intended, if they are not cor-
WARNING The power supply unit is supplied with
hazardous mains voltage. Leave serv-
icing to skilled personnel only. Inexpert
handling or modification of the power
supply unit may cause an electric shock
hazard.
8
GB
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor MMX-3 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor MMX-3 USB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info