632510
22
Zoom out
Zoom in
Previous page
1/41
Next page
22
English
CTRL ROOM
MAIN
DMIX-20
PARAMETER
ADJUST
GAIN GAIN GAIN GAIN GAIN GAIN GAIN
GAIN GAIN GAIN GAIN GAIN GAIN GAIN
GAIN GAIN
FX 1 / FX 2
MIC 0dB...+50dB LINE
-
15dB...+35dB
FX
MUTE
5
-
60
-
30
-
20
-
15
-
10
-
5
0
dB
10
-
MOTOR-DRIVEN FADER
12
17
13 14
19 21
24
26
20
5
6
3
4
7
2
1
8
9
10 11
16
18
15
22 23
25
1 Operating Elements and Connections
1 Gain controls to adjust the input sensitivity for the input channels
1 16� For the microphone inputs (XLR), the input gain can be
adjusted from 0 dB to +50 dB; for the line level inputs (6�3 mm),
the input gain can be adjusted from −15 dB to +35 dB�
The LED CLIP/SIG will light up in green when an input signal is
available; it will light up in red when the input is overloaded�
2
Volume controls for the two stereo inputs 17/18 and 19 /20
No gain control is provided for these line level inputs� The LED CLIP/
SIG will light up in green when an input signal is available; it will
light up in red when the input is overloaded�
3 Level indicator for the input signals and the Solo function
When the key SOLO METER (5) is not illuminated, the level of the
input signal of the currently selected channel [key (8)] will be in-
dicated ahead of level setting (PFL) and independently of channel
muting� When the key SOLO METER is illuminated, the signals of
the channels for which “Solo” has been selected will be indicated�
The setting of the key PFL (17) will determine if the level is indicat-
ed ahead of level setting of the channel (key illuminated) or after
level setting (key not illuminated)� If “Solo” is not selected for any
channel [key SOLO CLEAR (6) not illuminated], the level of the sum
signal MAIN will be indicated� The uppermost LED “CLIP” of the
level indicator will light up when the selected signal is overloaded
and distortions occur� In this case, attenuate the channel level, the
input gain and/or the output level of the signal source accordingly�
4
Level indicators for the sum signals of the subgroups SUB 1– 4
(AUX5 8) and the sum signal MAIN
The uppermost LED “CLIP” of the level indicator will light up when
the channel is overloaded and distortions occur� In this case, use
the appropriate controls (25) to attenuate the level of the subgroup
(of the AUX way) or of the sum channel MAIN�
5
Key SOLO METER to select the indication of the level indicator
(3): input level of a selected channel or level of the signals on the
Solo bus�
6 Key SOLO CLEAR to deactivate the Solo function for all channels
The key will be illuminated when “Solo” is selected for at least one
channel�
Pressing the key will automatically switch the sum signal MAIN to
the Solo bus�
7 Keys to select a subgroup SUB 1 4 (AUX 5 8) or the sum channel
MAIN for additional settings
8 Keys to select an input for additional settings
9 Touch screen for display and control
10 Keys to select one of the level control groups DCA 1 6
English
English Page
Fig. 1 Upper side
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMIX-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMIX-20 in the language / languages: English, German as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info